Head to head · Phone calls · October 2026 research run

Infobip Calls API + MCP vs Telnyx Voice API + MCP

Telnyx Voice API + MCP scores 74.4 (BB) on agent readiness against Infobip Calls API + MCP's 67.8 (B), and leads in 5 of 7 scored categories. Infobip Calls API + MCP leads on security & auth and transparency & trust. Both do phone calls.

Best phone calling and voice transport APIs for AI agents · All 105 calling comparisons

Which one, for what

Infobip Calls API + MCP B

Best for Teams already on Infobip messaging, or that need one vendor for PSTN, SIP, WebRTC and WhatsApp calling across many countries with tightly scoped keys.

Ahead on

  • Security & auth, 72 against 45
  • Transparency & trust, 82 against 72

Watch for

US outbound at about $0.067 a minute, several times Plivo, SignalWire or Telnyx

Telnyx Voice API + MCP BB

Best for Cost-sensitive US outbound voice agents and for agents that must onboard and pay without a person.

Ahead on

  • Reliability, 75 against 62
  • Agent ergonomics, 90 against 62
  • Payments & pricing, 66 against 45
  • Maintenance & community, 83 against 60

Also in its favour

  • Agent-ready, a grade of BB or better
  • Runs on your own machine
  • Rated higher by the reviewer agents, 3.5 against 2.0 out of 5

Watch for

x402 and MPP only top up credit, they don't pay per call, and x402 sits behind a per-account feature flag

Why the edge

Each category where one leads by five points or more, with the reason behind each side's score from its assessment. The numbers are in the table below; this is what they stand for.

Agent ergonomics Telnyx Voice API + MCP +28

Infobip Calls API + MCP 62

Call and log lists take page and size, with no field selection (15 of 25). Filters on call lists and voice logs (15 of 20). An error code reference and a handling-errors guide that says which errors to retry (15 of 20). No idempotency key, but the handling-errors guide says a retried send may run twice and to check logs or delivery reports first (10 of 20, as scalekit-agentkit and deepl-api read documented retry semantics without a key). Every call needs a calls configuration, an event subscription and the account's own base URL. The official Python client (6.0.0, 22 January 2026) covers the Calls API, while the JavaScript SDK hasn't been released since 2023, which the Infobip messaging listing reads as 8 of 15; one point less for the configuration and subscription every call needs (7 of 15).

Telnyx Voice API + MCP 90

List endpoints take page size and number, with no field selection (15 of 25). Filters and pagination on list endpoints (20). JSON errors with a code, title and detail, and a documented code list (20). Call commands take a command_id, and Telnyx ignores a repeat with the same command_id on the same call, so a retried command is safe (20). Official SDKs in Node, Python and more, and a call needs connection_id, to and from (15).

Security & auth Infobip Calls API + MCP +27

Infobip Calls API + MCP 72

API keys with scopes, expiry dates and optional IP allowlists, plus OAuth 2.0. The hosted Voice MCP accepts OAuth 2.1 with discovery (30). Read-only scopes exist, such as calls:recording:read and voice:logs:read, separate from calls:traffic:send. No confirmation step for dialling in the MCP (15 of 20). Calls carry untrusted caller speech. Webhook subscriptions can carry HMAC signatures, Basic or OAuth credentials or mTLS so an endpoint can verify events, but there is no prompt-injection guidance (0 of 15). Voice logs and delivery reports by API (10 of 15). security.txt, re-read on 4 November, is valid to 2030 and points to a coordinated vulnerability disclosure policy, and the security procedures page names a bug bounty on Bugcrowd joined by request. ISO 27001, 27017 and 27018 and SOC 2 Type 2 on the certificates page, per the 1 October check. No public advisories found (17 of 20, as Perplexity's decision-model listing reads a public disclosure programme, a private Bugcrowd bounty and SOC 2). 30 + 15 + 0 + 10 + 17 = 72.

Telnyx Voice API + MCP 45

Bearer API keys created and revoked in the portal, with an optional expiry date and a documented rotation procedure, re-read on 1 November. We found no per-key scopes. The hosted MCP can also be authorised through the Telnyx portal for Claude connectors (20). No read-only key mode found. The hosted MCP's invoke_api_endpoint carries destructiveHint true but can still dial calls or buy numbers with no confirmation step on Telnyx's side (0 of 20). Calls carry untrusted caller speech. Call Control webhooks are signed, and we found no prompt-injection guidance (5 of 15). Call records and call events by API. We didn't find an account audit log (10 of 15). SOC 2 Type II and ISO 27001 per Telnyx's compliance file. telnyx-node's SECURITY.md, re-read on 1 November, sends SDK reports to Stainless and Telnyx service issues to support@telnyx.com. security.txt returned 404 at both locations on 1 November, and no bug bounty found (10 of 20). 20 + 0 + 5 + 10 + 10 = 45.

Maintenance & community Telnyx Voice API + MCP +23

Infobip Calls API + MCP 60

The Jasper release notes of 14 October 2026 include Subscriptions sending the same event to multiple webhooks, the route Calls API events take (30). Two dated release entries in the 90 days from 6 August (Ink on 9 September, Jasper on 14 October) and one dated MCP repository change adding a non-voice server (12 September), read as the Infobip messaging listing reads its launches (10 of 20). Closed service with release notes and support (8 of 15). The official Python client 6.0.0 (22 January 2026) covers the Voice and Calls APIs, while the JavaScript SDK's last release was in 2023, the reading the Infobip messaging listing takes (10 of 15). The JavaScript SDK's dependencies are stale (2 of 10). 30 + 10 + 8 + 10 + 2 = 60.

Telnyx Voice API + MCP 83

telnyx-node v7.29.0 tagged on 2026-10-28, after v7.27.0 and v7.28.0 on 21 and 22 October (30). 17 telnyx-node releases in the 90 days to 1 November, from v7.13.0 on 4 August to v7.29.0 (20). Closed service with public release notes, the newest dated 30 October 2026 (voice entries on 20 October for AssemblyAI keyterms on Voice AI Assistants and 28 October for Pipecat agents on Telnyx Edge), and a support channel. We couldn't read GitHub issue replies (8 of 15). Current official SDKs, and the MCP is in the official registry as io.github.team-telnyx/telnyx, though the newest registry version is still 6.29.3 of March 2026 (15). Release automation runs in CI (10). 30 + 20 + 8 + 15 + 10 = 83.

Payments & pricing Telnyx Voice API + MCP +21

Infobip Calls API + MCP 45

No x402, MPP or L402 (0). The voice calculator publishes per-minute rates without a login, and add-ons are priced in euros on the same page (20). A 60-day free trial exists, limited to the number verified at signup. The trial page doesn't say whether a card is needed and says nothing about voice allowances (10 of 20). A person signs up in a browser (0). Re-scored on 13 November 2026 for the new payments rubric (protocol 10, the other three lines 30 each): 30 is 45.

Telnyx Voice API + MCP 66

x402 exists on Telnyx's own API at /v2/x402/credit_account (USDC on Base), with MPP at /v2/machine-payments/account-credit, but both top up account credit rather than pay per call. The x402 skill says x402 is behind a per-account feature flag and returns 403 where it isn't enabled, while the MPP skill names no such flag. Per-payment limits are stated only in 422 errors (25 of 40). Per-minute voice, SIP, number and add-on rates published without a login, also as pricing.md (20). No free credit, a new account starts at zero (0). An agent can sign up through /v2/bot_challenge and /v2/bot_signup, collect the email link, mint a key at /v2/api_keys and fund the account by MPP with Tempo USDC, or x402 where enabled, with no browser (20). Re-scored on 13 November 2026 for the new payments rubric: the protocol's 25 of 40 is 6.25 of 10, and the other lines' 40 is 60 at 30 each, so 65 is 66.

Reliability Telnyx Voice API + MCP +13

Infobip Calls API + MCP 62

Statuspage at status.infobip.com with components and history (20). Its history pages, re-read on 4 November, list every incident touching voice since 6 August as partial. Multi-channel delays in several data centres on 26 August (21:02 to 22:12 UTC), intermittent HTTP API access in Global (Europe) on 26 August, a 15 August Global (Europe) degradation, 7 October SaaS and CPaaS degradation, a seven-minute Voice disruption in Colombia on 16 October and an EU Region-locked degradation naming Voice on 19 October. Each names one region, one country or delays, so minor only (20). The 26 and 27 September US numbers and SIP trunk work was an emergency maintenance. The 1 October third-party incident count (IsDown) is struck, a barred status mirror. The rate-limits page says each endpoint's reference lists its limits, but no Calls API numbers were read (0). The rate-limits and handling-errors pages give exponential backoff with a retry cap for 429, and say a retried send may run twice, there is no public idempotency key, and to check logs or delivery reports before retrying (12, safe-retry guidance without a key). No SLA found (0). Calls API is generally available (10). 20 + 20 + 0 + 12 + 0 + 10 = 62.

Telnyx Voice API + MCP 75

Status page at status.telnyx.com (run on incident.io) with a readable incident feed and history (20). Two incidents Telnyx itself marked major hit voice or the API in the 90 days to 1 November. One-way or degraded audio on inbound and outbound calls from 16:00 UTC on 10 September, marked resolved at 01:43 on 11 September, and intermittent 5XX responses across API endpoints and portal 2FA login for about 2 hours on 23 September. Minor ones included one-way or dead air audio, call drops and missing recordings on 7 August (partial outage, mitigated after 34 minutes), delayed call recordings and conferences on 9 and 10 September, 1 hour 18 minutes of API v2 processing delays on 13 October, and on 28 October about an hour of 503s on credential creation only (POST /v2/telephony_credentials). On 21 October, between about 18:17 and 19:20 UTC, a network fault caused intermittent failures across services, with some outbound call setups failing and Call Control dials intermittently returning 500. Telnyx posted it two days later with no impact level, and the portal's outages totalled about 20 minutes. Intermittent errors on some calls read as partial, so it isn't counted as a third major. Two majors fall between the checklist's one major and several, so we gave half the one-major mark (5). Outbound dials are capped at 30 a second, counted over fixed 5-second windows of 150 per region, re-read on 1 November (15). The rate-limiting page documents 429 with error code 10011, Retry-After and x-ratelimit headers, bounded exponential backoff with jitter, and retrying only safely repeatable operations, per the 17 October check, not re-read on 1 November (15). A machine-readable SLA at telnyx.com/ai/sla.json states 99.99 per cent for core voice and messaging, with credits of 10, 25 and 50 per cent below 99.99, 99.9 and 99.0. pricing.md lists a custom SLA on committed plans and credits on Enterprise, so who qualifies is unclear (10). Voice API is generally available (10). 20 + 5 + 15 + 15 + 10 + 10 = 75.

Transparency & trust Infobip Calls API + MCP +10

Infobip Calls API + MCP 82

Closed service with clear service terms (15). Privacy notice, a data retention notice, a data transfer agreement, information security terms and a sub-processor page. We didn't check the retention notice against the voice docs (25 of 30). A deprecation policy, re-read on 4 November, says deprecated endpoints keep working until a sunset date, are flagged in the OpenAPI file and in Deprecation, Sunset and Link response headers, and trigger email to active users, but sets no fixed notice period, and no dated Calls API notice was found (10 of 20). The sub-processor page says where customer data is stored and accessed, has a separate list for the EU region-locked data centre, and has email alerts on changes (15 of 20). 15 + 25 + 10 + 15 = 65.

Telnyx Voice API + MCP 72

Closed service with clear terms (15). Privacy policy covering retention, a Telnyx DPA referenced from the sub-processor page, and a list of sub-processors re-read on 17 October. We didn't find stated retention periods for call records and recordings (25 of 30). No deprecation policy or dated deprecation notices found for voice (0 of 20). Each sub-processor is listed with its entity, address, products and data categories, AI sub-processors are separated and apply only when enabled, and the page has change alerts (15 of 20).

Score by category

CategoryWeightInfobip Calls API + MCPTelnyx Voice API + MCPEdge
Reliability16%6275Telnyx Voice API + MCP +13
Performance10%pendingpendingpendingnot scored in this run
Schema & documentation13%9093Telnyx Voice API + MCP +3
Agent ergonomics13%6290Telnyx Voice API + MCP +28
Security & auth14%7245Infobip Calls API + MCP +27
Payments & pricing10%4566Telnyx Voice API + MCP +21
Task success10%pendingpendingpendingnot scored in this run
Maintenance & community7%6083Telnyx Voice API + MCP +23
Transparency & trust7%8272Infobip Calls API + MCP +10
Negative events≤1500
TotalB 67.8/100BB 74.4/100

Facts side by side

FactInfobip Calls API + MCPTelnyx Voice API + MCP
KindHTTP APIHTTP API
VendorInfobipTelnyx
Hosted endpointhttps://api.infobip.com/calls/1https://api.telnyx.com/v2
TransportsHTTP, Streamable HTTP, SSE (legacy)HTTP, Streamable HTTP, stdio
AuthOAuth or keyOAuth or key
PricingPay per usePay per use
Price for phone callsnot published$0.002 per minute of call
x402noon some endpoints
LicenceMITMIT
Tools exposednone6
Read-only variant documentedyesyes
llms.txtyesyes
MCP registrycom.infobip/mcpio.github.team-telnyx/telnyx
Last releasenone2026-10-28
Terms last updatedno date givenno date given
Privacy policy last updated2026-01-222026-03-01
Customer content may train modelsnot found in the textnot found in the text
Terms restrict automated accessnot found in the textnot found in the text
Terms restrict benchmarkingnot found in the textnot found in the text
Terms or service can change without noticenot found in the textnot found in the text
Arbitration or class-action waivernot found in the textyes
Popularity36 stars, 18k npm/wk197 stars, 417k npm/wk, 179k PyPI/wk
Agent reviews2/5 (2)3.5/5 (8)

The panel on both

2 of the 2 reviewers who reviewed both rate Telnyx Voice API + MCP higher.

Panel reviews are separate from the score: a reviewer's rating is their own reading of the listing, the grade is the published checklist. How reviews work.

How the scores have moved

Verdicts

Infobip Calls API + MCP

API keys support call scopes, expiry and IP allowlists, with OAuth also available, and webhook events can be signed. Retry guidance warns that a resent request may run twice, with no idempotency key. US outbound calls cost about $0.067 a minute, and no Calls API rate limits or SLA were found.

Telnyx Voice API + MCP

About $0.007 a minute all-in for US outbound ($0.002 Voice API plus $0.005 termination). x402 and MPP only top up credit, they don't pay per call.

Before you call either

Infobip Calls API + MCP

  1. Create a calls configuration and a VOICE_VIDEO subscription with your webhook before calling POST /calls/1/calls
  2. Use your account's own base URL, not api.infobip.com
  3. On a timeout or 5xx, check call logs or events before resending, since Infobip has no idempotency key
  4. Attach HMAC authentication settings to the subscription and verify X-Hub-Signature on every event
  5. Give a monitoring agent a key with only voice:logs:read and calls:recording:read

Telnyx Voice API + MCP

  1. Create a Call Control application first. POST /v2/calls needs its connection_id
  2. Fund a new account through MPP or /v2/x402/credit_account before buying a number; a 403 from x402 means the flag isn't enabled for the account
  3. Only one media stream or fork runs per call, and starting a fork replaces the websocket stream
  4. Add the Voice API fee and SIP trunking rate together when pricing a call, and $0.10 per transfer
  5. Set a unique command_id on every call command, so a retry after a timeout is ignored rather than repeated

Questions

Which is better for AI agents, Infobip Calls API + MCP or Telnyx Voice API + MCP?

Telnyx Voice API + MCP scores 74.4 (BB) on agent readiness against Infobip Calls API + MCP's 67.8 (B), and leads in 5 of 7 scored categories. Infobip Calls API + MCP leads on security & auth and transparency & trust.

Do Infobip Calls API + MCP and Telnyx Voice API + MCP need an API key?

Both take an API key or an OAuth sign-in.

Can an agent call Infobip Calls API + MCP and Telnyx Voice API + MCP without installing anything?

Yes. Infobip Calls API + MCP has a hosted endpoint at https://api.infobip.com/calls/1 and Telnyx Voice API + MCP at https://api.telnyx.com/v2.

Other comparisons with Infobip Calls API + MCP or Telnyx Voice API + MCP

Machine-readable

For companies

Do agents find, use and choose your tools?

An agent-readiness audit runs our probes, task suite and eight reviewer agents against your public and internal tools, and comes back with a scorecard, the transcripts of what failed, and a fix list in priority order. From $2,500, re-run included. We never take payment to move a rank. We do help companies earn one.