# Check a part under load, flow or heat

> Check a part under load, flow or heat: 0 companies fully do it, 3 with a limit, 6 carry the tag. Every listing in CAD, engineering & fabrication with the reason and a source.

- Canonical: https://www.anchorterminal.com/niches/cad.simulate-part/
- Markdown: https://www.anchorterminal.com/niches/cad.simulate-part/index.md (~950 tokens)
- Slim: https://www.anchorterminal.com/niches/cad.simulate-part/index.min.md (~230 tokens, same facts, less prose, for token-sensitive contexts)
- JSON: https://www.anchorterminal.com/niches/cad.simulate-part/index.json (this page as data, same URL with Accept: application/json)
- Site index for agents: https://www.anchorterminal.com/llms.txt (the key docs and every listing in one file, at most 16 MB, about 4 million tokens: https://www.anchorterminal.com/llms-full.txt)
- API: https://www.anchorterminal.com/api/v1/index.json
- MCP: https://www.anchorterminal.com/mcp (the whole catalogue as tools, no key)
- DNS: dig +short TXT <slug>.grade.anchorterminal.com (the grade as a DNS TXT record, for a sandbox with no HTTP where names still resolve; also top., best.<category>. and <a>.vs.<b>. under the zone, and the same under grade.letme.dev)
- Licence: CC BY 4.0, credit Anchor Terminal and link this page (https://www.anchorterminal.com/terms/#data)
- Updated: 2026-11-15

No company's docs show a full fit yet. The listings below do the job with a limit, or not at all.

| Companies, full fit | With a limit | Carry the tag | Share of the category's work | First-hand accounts |
| --- | --- | --- | --- | --- |
| 0 | 3 | 6 | 10 | 4 |

## What counts as done

A finished run returning maximum stress, displacement or flow figures and a pass or fail against a stated limit, for each variant, with the job status readable by API.

How agents ask for it: will this bracket hold 50 kg; run a stress check; simulate airflow through this housing; sweep these parameters and compare

## Does the job, with a limit

It does the job, but something in the docs or a user's account will get in an agent's way. The limit is named in each row.

- **Adam (Adam AI Labs, Inc.)**: Named operations drive SOLIDWORKS Simulation, Ansys Mechanical, Fluent, Abaqus, COMSOL and others, but these run on a paired computer with the application and licence installed; the docs warn a screenshot does not prove a completed solve.
- **nTop (nTopology Inc.)**: A notebook with simulation blocks can be swept by ntopcl with JSON inputs, and outputs such as figures with units come back as JSON for pass or fail. The solver runs on a licensed desktop, and the EULA bars servers unless the order form allows them.
- **SimScale (SimScale GmbH)**: The whole chain is in the API: storage upload, geometry import with event log, mesh operations with check and estimate, runs with parametric sub-runs, results, reports and a sandbox. API keys come only with Enterprise, and maximum figures sit in result files or reports, not one value.

- not this job: Autodesk Platform Services (Autodesk, Inc.): None of the published APS specs (authentication, data management, Model Derivative, OSS, webhooks, Forma) covers simulation setup or results.
- not this job: Onshape (PTC Inc.): No simulation endpoints in the API guides read; acc-31 ran FEM by importing from Onshape into SimScale.
- not this job: PrusaLink (Prusa Research a.s.): No simulation; it reports printer and job telemetry only.
- not this job: Zoo (Zoo Corporation): Analysis endpoints give mass, volume, density, centre of mass and surface area; there is no load, flow or heat simulation.

## What stops agents finishing

- API keys only on an enterprise plan
- solver needs a Windows host with a signed-in licence
- schema version mismatch locks the run out of the web workbench

## Around it

Before: cad.part-from-description, cad.edit-existing-model, cad.export-model. After: cad.edit-existing-model, document-generation.report.

## Where this comes from

Weight 10 of 100 in CAD, engineering & fabrication: 4 of 37 accounts (SimScale 1, Onshape DOE 1, two agent-facing FEA requests); thin, and SimScale and nTop have no API account found

As data: https://www.anchorterminal.com/api/v1/use-cases/cad.simulate-part.json, or the MCP tool get_use_case with id cad.simulate-part. Draft, read 2026-11-15 from public docs and first-hand accounts, not yet reviewed by a person.

---

Query this catalogue directly over MCP: https://www.anchorterminal.com/mcp (Streamable HTTP, no key). How: https://www.anchorterminal.com/agents/#mcp
