# Send a part to a 3D printer and watch it

> Send a part to a 3D printer and watch it: 0 companies fully do it, 1 with a limit, 1 carry the tag. Every listing in CAD, engineering & fabrication with the reason and a source.

- Canonical: https://www.anchorterminal.com/niches/cad.queue-print/
- Markdown: https://www.anchorterminal.com/niches/cad.queue-print/index.md (~750 tokens)
- Slim: https://www.anchorterminal.com/niches/cad.queue-print/index.min.md (~230 tokens, same facts, less prose, for token-sensitive contexts)
- JSON: https://www.anchorterminal.com/niches/cad.queue-print/index.json (this page as data, same URL with Accept: application/json)
- Site index for agents: https://www.anchorterminal.com/llms.txt (the key docs and every listing in one file, at most 16 MB, about 4 million tokens: https://www.anchorterminal.com/llms-full.txt)
- API: https://www.anchorterminal.com/api/v1/index.json
- MCP: https://www.anchorterminal.com/mcp (the whole catalogue as tools, no key)
- DNS: dig +short TXT <slug>.grade.anchorterminal.com (the grade as a DNS TXT record, for a sandbox with no HTTP where names still resolve; also top., best.<category>. and <a>.vs.<b>. under the zone, and the same under grade.letme.dev)
- Licence: CC BY 4.0, credit Anchor Terminal and link this page (https://www.anchorterminal.com/terms/#data)
- Updated: 2026-11-15

No company's docs show a full fit yet. The listings below do the job with a limit, or not at all.

| Companies, full fit | With a limit | Carry the tag | Share of the category's work | First-hand accounts |
| --- | --- | --- | --- | --- |
| 0 | 1 | 1 | 17 | 7 |

## What counts as done

The file on the printer's storage and the job in PRINTING state, confirmed by a status read, then a finished or failed state reported, with no job started while the printer is busy.

How agents ask for it: print this; send it to my Prusa; start the print and tell me when it is done

## Does the job, with a limit

It does the job, but something in the docs or a user's account will get in an agent's way. The limit is named in each row.

- **PrusaLink (Prusa Research a.s.)**: PUT /api/v1/files/{storage}/{path} with Print-After-Upload starts a job, 409 refuses a busy printer, and /api/v1/status reports PRINTING, FINISHED, STOPPED or ERROR. The host must be on the printer's LAN, the key comes from the printer's menu (acc-23), and uploads stall in open issue 5591 (acc-24) with corruption in acc-25.

- not this job: Adam (Adam AI Labs, Inc.): No printer connector among the supported applications; outputs stop at model files.
- not this job: Autodesk Platform Services (Autodesk, Inc.): No printer or slicer service among the APS APIs.
- not this job: nTop (nTopology Inc.): No printer connection; nTop stops at geometry and data.
- not this job: Onshape (PTC Inc.): No printer or slicer integration in the API.
- not this job: SimScale (SimScale GmbH): No printer integration.
- not this job: Zoo (Zoo Corporation): No printer integration; outputs stop at model files.

## What stops agents finishing

- agent host not on the printer's local network
- upload stalls or corrupts storage
- credential found only on the printer's own menu
- stop or delete with no confirmation

## Around it

Before: cad.part-from-description, slicer.slice. After: notifications.push.

## Where this comes from

Weight 17 of 100 in CAD, engineering & fabrication: 7 of 37 accounts (PrusaLink 4, Bambu 1, FreeCAD-to-printer 1, one plan); upload faults and LAN-only access recur

As data: https://www.anchorterminal.com/api/v1/use-cases/cad.queue-print.json, or the MCP tool get_use_case with id cad.queue-print. Draft, read 2026-11-15 from public docs and first-hand accounts, not yet reviewed by a person.

---

Query this catalogue directly over MCP: https://www.anchorterminal.com/mcp (Streamable HTTP, no key). How: https://www.anchorterminal.com/agents/#mcp
