# Model a new part from a description with dimensions

> Model a new part from a description with dimensions: 0 companies fully do it, 4 with a limit, 6 carry the tag. Every listing in CAD, engineering & fabrication with the reason and a source.

- Canonical: https://www.anchorterminal.com/niches/cad.part-from-description/
- Markdown: https://www.anchorterminal.com/niches/cad.part-from-description/index.md (~1,050 tokens)
- Slim: https://www.anchorterminal.com/niches/cad.part-from-description/index.min.md (~230 tokens, same facts, less prose, for token-sensitive contexts)
- JSON: https://www.anchorterminal.com/niches/cad.part-from-description/index.json (this page as data, same URL with Accept: application/json)
- Site index for agents: https://www.anchorterminal.com/llms.txt (the key docs and every listing in one file, at most 16 MB, about 4 million tokens: https://www.anchorterminal.com/llms-full.txt)
- API: https://www.anchorterminal.com/api/v1/index.json
- MCP: https://www.anchorterminal.com/mcp (the whole catalogue as tools, no key)
- DNS: dig +short TXT <slug>.grade.anchorterminal.com (the grade as a DNS TXT record, for a sandbox with no HTTP where names still resolve; also top., best.<category>. and <a>.vs.<b>. under the zone, and the same under grade.letme.dev)
- Licence: CC BY 4.0, credit Anchor Terminal and link this page (https://www.anchorterminal.com/terms/#data)
- Updated: 2026-11-15

No company's docs show a full fit yet. The listings below do the job with a limit, or not at all.

| Companies, full fit | With a limit | Carry the tag | Share of the category's work | First-hand accounts |
| --- | --- | --- | --- | --- |
| 0 | 4 | 6 | 30 | 14 |

## What counts as done

A STEP file (plus STL or 3MF for printing) whose bounding box and hole count, diameters and positions match the stated dimensions, with the source model left editable.

Measured, for our own tests: dimensions within 0.1 mm, within 5 minutes and under 10 calls.

How agents ask for it: make a bracket 50 mm wide with four M5 holes; design an enclosure for this board; model a part that fits these measurements

## Does the job, with a limit

It does the job, but something in the docs or a user's account will get in an agent's way. The limit is named in each row.

- **Adam (Adam AI Labs, Inc.)**: A task delegated to Adam's agent models in a connected CAD application and files come back through the task, with STEP, STL and 3MF previewed. No dimension check, time bound or call count is documented, the surface is beta, and acc-20 found directional prompts ambiguous.
- **Autodesk Platform Services (Autodesk, Inc.)**: No description-to-model route: the agent must write an add-in or script in Inventor's or Fusion's desktop API and run it on the Automation API's cloud engine. The Design Automation guide renders empty for readers, so time bounds and call counts could not be read.
- **Onshape (PTC Inc.)**: An agent can add modelling operations or write FeatureScript into a new Part Studio and export STEP with units, keeping the model editable; acc-28 moved to this route. No description-to-model service exists, so dimensions rest on the agent, and calls count against 2,500 a year on Free and Standard.
- **Zoo (Zoo Corporation)**: Text-to-CAD and the Zookeeper agent return editable KCL, conversion gives STEP and STL, and bounding-box and volume endpoints check the result. acc-02's bracket prompt ran 8 minutes then failed, acc-03's cached outputs were unreachable (both still open), and acc-05 was told assemblies fail.

- not this job: nTop (nTopology Inc.): ntopcl runs an existing notebook with JSON inputs and returns JSON outputs; it does not build a new part from a description, and there is no hosted geometry API.
- not this job: PrusaLink (Prusa Research a.s.): A printer interface; it takes sliced G-code and makes no models.
- not this job: SimScale (SimScale GmbH): SimScale imports geometry for simulation; geometry primitives exist only as references inside a simulation spec, and no part is modelled or exported.

## What stops agents finishing

- job runs for minutes then fails with an internal error
- assemblies and fasteners refused or wrong
- model returns geometry that looks right but misses stated dimensions
- output only as mesh

## Around it

Before: chat.user-request, vision.read-sketch. After: cad.queue-print, cad.quote-or-order-part, cad.simulate-part.

## Where this comes from

Weight 30 of 100 in CAD, engineering & fabrication: 14 of 37 accounts (Zoo 6, Adam 1, code-CAD with CadQuery, build123d and FreeCAD 6, one eval); the most discussed job on Hacker News

As data: https://www.anchorterminal.com/api/v1/use-cases/cad.part-from-description.json, or the MCP tool get_use_case with id cad.part-from-description. Draft, read 2026-11-15 from public docs and first-hand accounts, not yet reviewed by a person.

---

Query this catalogue directly over MCP: https://www.anchorterminal.com/mcp (Streamable HTTP, no key). How: https://www.anchorterminal.com/agents/#mcp
