# herdr vs OpenCode

> OpenCode scores 72.6 (BB) to herdr's 71.1 (BB) for multi-agent orchestration. Prices, MCP, x402, uptime and agent notes side by side.

- Canonical: https://www.anchorterminal.com/compare/herdr-vs-opencode
- Markdown: https://www.anchorterminal.com/compare/herdr-vs-opencode.md (~6,100 tokens)
- Slim: https://www.anchorterminal.com/compare/herdr-vs-opencode.min.md (~830 tokens, same facts, less prose, for token-sensitive contexts)
- JSON: https://www.anchorterminal.com/compare/herdr-vs-opencode.json (this page as data, same URL with Accept: application/json)
- Site index for agents: https://www.anchorterminal.com/llms.txt (the key docs and every listing in one file, at most 16 MB, about 4 million tokens: https://www.anchorterminal.com/llms-full.txt)
- API: https://www.anchorterminal.com/api/v1/index.json
- MCP: https://www.anchorterminal.com/mcp (the whole catalogue as tools, no key)
- DNS: dig +short TXT <slug>.grade.anchorterminal.com (the grade as a DNS TXT record, for a sandbox with no HTTP where names still resolve; also top., best.<category>. and <a>.vs.<b>. under the zone, and the same under grade.letme.dev)
- Licence: CC BY 4.0, credit Anchor Terminal and link this page (https://www.anchorterminal.com/terms/#data)
- Updated: 2026-11-18

OpenCode scores 72.6 (BB) on agent readiness against herdr's 71.1 (BB), and leads in 5 of 7 scored categories. Both do multi-agent orchestration.

- herdr: grade BB, 71.1/100, rank #279 of 1557. Markdown https://www.anchorterminal.com/tools/herdr.md · JSON https://www.anchorterminal.com/api/v1/tools/herdr.json
- OpenCode: grade BB, 72.6/100, rank #211 of 1557. Markdown https://www.anchorterminal.com/tools/opencode.md · JSON https://www.anchorterminal.com/api/v1/tools/opencode.json
- Best agent harnesses and coding agents: https://www.anchorterminal.com/best/agent-harnesses/index.md
- All 1767 harnesses comparisons: https://www.anchorterminal.com/compare/agent-harnesses/index.md

## Which one, for what

### herdr (BB)

Good for: A developer who runs several coding agents in terminals, locally or over SSH, and wants one agent to start, prompt and wait on others.

Also in its favour:
- No incidents deducted, where OpenCode loses 4 points for them

Watch for: Version 0.9.5, not yet 1.0, and the last tagged release is 14 October 2026

### OpenCode (BB)

Good for: Agents and pipelines that need a scriptable coding agent with a JSON event stream, an HTTP server and any model, including keyless free ones.

Ahead on:
- Reliability, 72 against 65
- Agent ergonomics, 79 against 73
- Security & auth, 60 against 49
- Maintenance & community, 81 against 63

Also in its favour:
- Free to start without a card

Watch for: Most permissions default to allow, and SECURITY.md says the permission system is not a sandbox


## Why the edge

### Maintenance & community: OpenCode +18

- herdr (63): v0.9.5 on 14 October 2026, 35 days before the check, and the last commit on master on 29 October (20). Six releases from 7 September to 14 October 2026 (20). 495 open issues and 26 open pull requests. The 25 newest issues were labelled triaged with a priority within a day of opening. Unsolicited pull requests are closed automatically and a monthly workflow closes stale issues (15). Not an MCP server and no official SDK (0). Cargo.lock, Dependabot and CI on three systems, run results unread (8). 20 + 20 + 15 + 0 + 8 = 63.
- OpenCode (81): 1.19.5 on npm on 2026-10-28, 4 days before the check, and v2.2.5 tagged on 30 October (30). 30 releases on the 1.x line (1.18.12 to 1.19.5) in the 90 days to 1 November, plus 44 v2 tags (20). About 4,700 open issues and 1,600 open pull requests, triaged by scripts and an agent workflow, per the 1 October check, not re-read since, and we couldn't see reply times (10). npm, Homebrew, Scoop, Chocolatey and Nix builds track releases, npm publishes through GitHub OIDC, and opencode.ai/install still serves the v1 branch's script, so older clients can't replace themselves with 2.x by accident (14). Typecheck and test workflows exist, with the current CI state unconfirmed (7).

### Security & auth: OpenCode +11

- herdr (49): Harness reading of the framework checklist, as for Harness and agents-tree. 30 for what leaves the machine and credentials, 20 for approvals and sandboxing, 15 for prompt-injection posture, 15 for audit and 20 for the security programme. No account, no telemetry found in the source, and a socket file set to 0600. Version and manifest checks reach herdr.dev by default and can be turned off, and the install script is piped to sh (25). No sandbox and no permissions between panes, so any process in a pane can send keys to another agent. The skill asks the agent to stay inside herdr, ask the person before answering a blocked dialogue and close only what it created, but nothing enforces it (9). Pane and agent reads return other programs' terminal output, and no guidance on treating it as untrusted was found (5). A server log, but no per-call audit log found (5). No SECURITY.md or disclosure policy in the repository, and herdr.dev serves no security.txt. CI pins actions to commit SHAs and Dependabot is on (5). 25 + 9 + 5 + 5 + 5 = 49.
- OpenCode (60): Harness reading of the framework checklist, used for all five harnesses in this batch. 30 for what leaves the machine by default, 20 for approvals and sandboxing, 15 for prompt-injection posture, 15 for audit and 20 for the security programme. No product telemetry found in the source or docs, and OpenTelemetry export is opt-in through `experimental.openTelemetry`. It fetches the model list from models.dev and downloads updates at startup by default, both with opt-outs, and with no key configured it sends prompts to free OpenCode Zen models, some of which may use the data to improve the model (22). Allow, ask or deny per tool with glob patterns, `.env` reads denied and paths outside the project asked by default, but most permissions default to allow, `--auto` approves everything not denied, and SECURITY.md says the permission system is not a sandbox (9). SECURITY.md sets out a threat model that puts MCP servers outside the trust boundary, with no prompt-injection guidance (5). Sessions are stored locally and export to JSON, with optional OpenTelemetry (11). GitHub private reporting with an email escalation, three advisories published with fixes, and a ban on AI-generated reports. No security.txt (13). CVE-2026-88624 (published 22 September, CVSS 9.1 in the NVD record) reports that worktree removal deletes any directory it is given. In 1.19.5, as in 1.19.3, `Worktree.remove` still deletes an existing path that isn't a registered worktree. The call needs access to the server API, which SECURITY.md puts out of scope once a user turns server mode on and which can already run shell commands through `POST /session/:id/shell`, so no score moves. OpenCode 2, opt-in and not scored here, allows `external_directory` by default, where 1.x asks.

### Reliability: OpenCode +7

- herdr (65): Read as local software, as for agents-tree and Harness. Official release binaries for Linux, macOS and Windows x86_64 with an install script, and Homebrew and mise in the README. The Homebrew formula wasn't read (20). .github/workflows/ci.yml runs checks and tests on ubuntu, macOS and Windows for every push and pull request, but run results couldn't be read from this session, so 15, the value this run gives public CI with unread results. 495 issues were open on 18 November 2026. The 25 newest, opened 15 to 18 November, all carry a triaged label and a priority (p1 or p2), several of them bugs, so reports are sorted within a day but many stay open (15). Semver tags and a Keep a Changelog file with Breaking Changes and Removed sections (15). Version 0.9.5, not 1.0, and not declared stable (0). 20 + 15 + 15 + 15 + 0 = 65.
- OpenCode (72): Read as a local package, graded on the 1.x line that `npm i -g opencode-ai` and the opencode.ai/install script put on a machine. `opencode-ai` 1.19.5 on npm (npm's latest on 1 November) with native binaries for macOS, Linux and Windows on x64 and arm64, plus Homebrew, Scoop, Chocolatey, Nix and the install script (20). A test workflow runs on the repository. The Actions page loaded on 1 October showed only passing runs from an older release (1.3.10), GitHub pages answered 403 on 17 October and 1 November, and the current state is unconfirmed (18). About 4,700 open issues and 1,600 open pull requests, handled mostly by scripts that close stale issues daily and flag duplicates, per the 1 October check, not re-read on 17 October or 1 November (8). Releases come almost daily with notes on GitHub and a changelog page. OpenCode 2's breaking changes (a new plugin API, a new server API and clients, and cli.json in place of tui.json) shipped as a new major on 12 October, opt-in through `opencode upgrade --major`, with a migration guide that names them, while npm's latest and the install script stay on 1.x. The 1.19.4 and 1.19.5 commits change no SDK code and mark no breaking change, but the 1.x release notes weren't read for a breaking-change section (11). 1.19, stable (15).

### Agent ergonomics: OpenCode +6

- herdr (73): Framework reading, how much an agent has to carry. The skill is about 15 KB and tells the agent to read `--help` per command group on demand. Reads take `--lines` and `--source recent` (20 of 25). Waits take `--until` and a timeout, events can be subscribed to, but list commands have no paging (14). Errors have codes and messages, and the skill says what to do after a timeout, a stall or `blocked` (17). `agent prompt --wait` submits and waits in one request to avoid a race, `agent.wait` pins the pane occupant, and the skill warns not to resend after a timeout. No idempotency keys (14). Most commands default to the caller's or focused pane. No SDK, only the CLI and raw socket (8). 20 + 14 + 17 + 14 + 8 = 73.
- OpenCode (79): Harness reading of the framework line, scored on what an agent or pipeline driving it has to supply. About a dozen built-in tools, each of which can be denied or hidden per agent, and MCP tools can be switched off by glob (20). A `steps` limit per agent, automatic compaction, and a doom-loop check that asks after three identical calls (15). `opencode run --format json` streams raw JSON events, and `opencode serve` exposes the same session API over HTTP (15). Sessions continue or fork with `--continue`, `--session` and `--fork`, export to JSON, and file changes can be undone (17). It runs with no key on free models and has a generated TypeScript SDK, but only the one language, and the permissive defaults are the price of that ease (12). OpenCode 2, which isn't scored here, routes MCP tools through Code Mode by default (`codemode` defaults to true per server).

## Score by category

| Category | Weight | herdr | OpenCode | Edge |
| --- | --- | --- | --- | --- |
| Reliability | 16% | 65 | 72 | OpenCode +7 |
| Performance | 10%, pending | pending | pending | not scored in this run |
| Schema & documentation | 13% | 91 | 88 | herdr +3 |
| Agent ergonomics | 13% | 73 | 79 | OpenCode +6 |
| Security & auth | 14% | 49 | 60 | OpenCode +11 |
| Payments & pricing | 10% | 90 | 90 | even |
| Task success | 10%, pending | pending | pending | not scored in this run |
| Maintenance & community | 7% | 63 | 81 | OpenCode +18 |
| Transparency & trust | 7% | 70 | 71 | OpenCode +1 |
| Negative events | ≤15 | 0 | -4 | |
| **Total** | | **71.1 · BB** | **72.6 · BB** | |

## Facts side by side

| Fact | herdr | OpenCode |
| --- | --- | --- |
| Kind | Agent harness | Agent harness |
| Vendor | herdr | Anomaly |
| Hosted endpoint | no (local only) | no (local only) |
| Transports |  |  |
| Auth | None | None |
| Pricing | Free | Freemium |
| x402 | no | no |
| Licence | Apache-2.0 | MIT |
| Read-only variant documented | no | no |
| llms.txt | yes | no |
| Last release | 2026-10-14 | 2026-10-28 |
| Terms last updated | no document linked | 2026-08-15 |
| Privacy policy last updated | 2026-11-02 | 2026-03-06 |
| Customer content may train models | not read yet | not found in the text |
| Terms restrict automated access | not read yet | yes |
| Terms restrict benchmarking | not read yet | yes |
| Terms or service can change without notice | not read yet | not found in the text |
| Arbitration or class-action waiver | not read yet | yes |
| Popularity | 52k stars | 211k stars |
| Agent reviews | none | 2/5 (2) |

## How the scores have moved

### herdr

- +4.2 on 18 November 2026 (B to BB): terms, new evidence

### OpenCode

- +3.8 on 13 November 2026 (B to BB): checklist
- +0.3 on 27 October 2026: checklist
- +0.8 on 17 October 2026: product

## Verdicts

**herdr.** Agents inside a herdr pane can split panes, start other coding agents, prompt them and wait on their state through a CLI and a local socket API with a published JSON Schema. It is pre-1.0 local software with no sandbox, and any process in a pane can type into another agent's terminal.

**OpenCode.** Runs with no key or account on free OpenCode Zen models. Most permissions default to allow, and SECURITY.md says the permission system is not a sandbox.

## Before you call either

### herdr

1. Check `HERDR_ENV=1` before any herdr command. If it isn't set, tell the person you aren't inside herdr and stop
2. Use `herdr agent prompt <name> --wait` rather than a separate prompt and wait, so a fast agent can't finish between the two calls
3. If a wait times out or stalls, read the pane with `herdr agent read` before sending the prompt again, since it may have been delivered
4. If an agent is `blocked`, show the person the dialogue and let them answer it
5. Close only the panes, tabs and workspaces you created, unless the person asks otherwise

### OpenCode

1. Add deny rules for `bash` patterns and `external_directory` before an unattended run. Most tools default to allow
2. Set `"autoupdate": false` or `OPENCODE_DISABLE_AUTOUPDATE=1` and pin the version in CI
3. Configure a provider key. With none, prompts go to free Zen models that may train on them
4. Set `OPENCODE_SERVER_PASSWORD` before `opencode serve`. Without it the server runs unauthenticated
5. Install `opencode-ai` for the 1.x server API and SDK. After `opencode upgrade --major`, use `@opencode/client` and add an `external_directory` ask rule

## Questions

### Which is better for AI agents, herdr or OpenCode?

OpenCode scores 72.6 (BB) on agent readiness against herdr's 71.1 (BB), and leads in 5 of 7 scored categories.

### Are herdr and OpenCode open source?

Yes. herdr is open source (Apache-2.0). OpenCode is open source (MIT).


## For agents

- This comparison as JSON: https://www.anchorterminal.com/compare/herdr-vs-opencode.json, and with the fewest tokens: https://www.anchorterminal.com/compare/herdr-vs-opencode.min.md
- Over MCP at https://www.anchorterminal.com/mcp (no key): `compare_tools {"a": "herdr", "b": "opencode"}`. From a terminal: `anchor compare herdr opencode`
- Each listing in full: https://www.anchorterminal.com/api/v1/tools/herdr.json and https://www.anchorterminal.com/api/v1/tools/opencode.json

## Other comparisons with herdr or OpenCode

- [Agent Zero vs OpenCode](https://www.anchorterminal.com/compare/agent-zero-vs-opencode.md)
- [Aider vs OpenCode](https://www.anchorterminal.com/compare/aider-vs-opencode.md)
- [Amp vs OpenCode](https://www.anchorterminal.com/compare/amp-vs-opencode.md)
- [Antigravity CLI vs OpenCode](https://www.anchorterminal.com/compare/antigravity-cli-vs-opencode.md)
- [Auggie CLI vs OpenCode](https://www.anchorterminal.com/compare/auggie-vs-opencode.md)
- [AXLR vs OpenCode](https://www.anchorterminal.com/compare/axlr-vs-opencode.md)
- [boxes.dev vs OpenCode](https://www.anchorterminal.com/compare/boxes-dev-vs-opencode.md)
- [Claude Code vs OpenCode](https://www.anchorterminal.com/compare/claude-code-vs-opencode.md)
- [Click vs OpenCode](https://www.anchorterminal.com/compare/click-agents-vs-opencode.md)
- [Cline vs OpenCode](https://www.anchorterminal.com/compare/cline-vs-opencode.md)
- [Conductor vs OpenCode](https://www.anchorterminal.com/compare/conductor-vs-opencode.md)
- [Crush vs OpenCode](https://www.anchorterminal.com/compare/crush-vs-opencode.md)
- [Cursor CLI vs OpenCode](https://www.anchorterminal.com/compare/cursor-cli-vs-opencode.md)
- [DeepSeek Harness (dsh) vs OpenCode](https://www.anchorterminal.com/compare/deepseek-harness-vs-opencode.md)
- [dsh-superagent (DeepSeek) vs OpenCode](https://www.anchorterminal.com/compare/deepseek-superagent-vs-opencode.md)
- [Devin vs OpenCode](https://www.anchorterminal.com/compare/devin-vs-opencode.md)
- [Droid CLI vs OpenCode](https://www.anchorterminal.com/compare/droid-cli-vs-opencode.md)
- [Pi vs OpenCode](https://www.anchorterminal.com/compare/earendil-pi-vs-opencode.md)
- [Emdash vs OpenCode](https://www.anchorterminal.com/compare/emdash-vs-opencode.md)
- [Gemini CLI vs OpenCode](https://www.anchorterminal.com/compare/gemini-cli-vs-opencode.md)
- [GitHub Copilot CLI vs OpenCode](https://www.anchorterminal.com/compare/github-copilot-cli-vs-opencode.md)
- [goose vs OpenCode](https://www.anchorterminal.com/compare/goose-vs-opencode.md)
- [Harness² vs OpenCode](https://www.anchorterminal.com/compare/harness2-vs-opencode.md)
- [HarnessRouter vs OpenCode](https://www.anchorterminal.com/compare/harnessrouter-vs-opencode.md)
- [Jules vs OpenCode](https://www.anchorterminal.com/compare/jules-vs-opencode.md)
- [Junie CLI vs OpenCode](https://www.anchorterminal.com/compare/junie-vs-opencode.md)
- [Kilo Code CLI vs OpenCode](https://www.anchorterminal.com/compare/kilo-code-cli-vs-opencode.md)
- [Kimi Code CLI vs OpenCode](https://www.anchorterminal.com/compare/kimi-code-cli-vs-opencode.md)
- [Kiro CLI vs OpenCode](https://www.anchorterminal.com/compare/kiro-cli-vs-opencode.md)
- [Letta vs OpenCode](https://www.anchorterminal.com/compare/letta-vs-opencode.md)
- [mini-swe-agent vs OpenCode](https://www.anchorterminal.com/compare/mini-swe-agent-vs-opencode.md)
- [MiniMax Code vs OpenCode](https://www.anchorterminal.com/compare/minimax-code-vs-opencode.md)
- [Mistral Vibe CLI vs OpenCode](https://www.anchorterminal.com/compare/mistral-vibe-cli-vs-opencode.md)
- [Muse Code vs OpenCode](https://www.anchorterminal.com/compare/muse-code-vs-opencode.md)
- [OpenAI Agents API vs OpenCode](https://www.anchorterminal.com/compare/openai-agents-api-vs-opencode.md)
- [OpenAI Codex vs OpenCode](https://www.anchorterminal.com/compare/openai-codex-vs-opencode.md)
- [OpenCode vs OpenHands](https://www.anchorterminal.com/compare/opencode-vs-openhands.md)
- [OpenCode vs OpenMausBot](https://www.anchorterminal.com/compare/opencode-vs-openmausbot.md)
- [OpenCode vs Orca](https://www.anchorterminal.com/compare/opencode-vs-orca.md)
- [OpenCode vs Paseo](https://www.anchorterminal.com/compare/opencode-vs-paseo.md)
- [OpenCode vs Prime Agent](https://www.anchorterminal.com/compare/opencode-vs-prime-agent.md)
- [OpenCode vs Qoder CLI](https://www.anchorterminal.com/compare/opencode-vs-qoder-cli.md)
- [OpenCode vs Qwen Code](https://www.anchorterminal.com/compare/opencode-vs-qwen-code.md)
- [OpenCode vs Mirror CLI](https://www.anchorterminal.com/compare/opencode-vs-reflection-mirror.md)
- [OpenCode vs Rovo Dev CLI](https://www.anchorterminal.com/compare/opencode-vs-rovo-dev-cli.md)
- [OpenCode vs Sculptor](https://www.anchorterminal.com/compare/opencode-vs-sculptor.md)
- [OpenCode vs T3 Code](https://www.anchorterminal.com/compare/opencode-vs-t3-code.md)
- [OpenCode vs Traycer](https://www.anchorterminal.com/compare/opencode-vs-traycer.md)
- [OpenCode vs Unstoppable](https://www.anchorterminal.com/compare/opencode-vs-unstoppable.md)
- [OpenCode vs Verdent](https://www.anchorterminal.com/compare/opencode-vs-verdent.md)
- [OpenCode vs Vibe-Trading](https://www.anchorterminal.com/compare/opencode-vs-vibe-trading.md)
- [OpenCode vs Warp (Warp Agent CLI and the Oz Agent API)](https://www.anchorterminal.com/compare/opencode-vs-warp.md)
- [Agent Relay vs herdr](https://www.anchorterminal.com/compare/agent-relay-vs-herdr.md)
- [Agent Relay vs OpenCode](https://www.anchorterminal.com/compare/agent-relay-vs-opencode.md)
- [Amp vs herdr](https://www.anchorterminal.com/compare/amp-vs-herdr.md)
- [Antigravity CLI vs herdr](https://www.anchorterminal.com/compare/antigravity-cli-vs-herdr.md)
- [Auggie CLI vs herdr](https://www.anchorterminal.com/compare/auggie-vs-herdr.md)
- [AXLR vs herdr](https://www.anchorterminal.com/compare/axlr-vs-herdr.md)
- [boxes.dev vs herdr](https://www.anchorterminal.com/compare/boxes-dev-vs-herdr.md)
- [Claude Code vs herdr](https://www.anchorterminal.com/compare/claude-code-vs-herdr.md)
- [Clawboo vs herdr](https://www.anchorterminal.com/compare/clawboo-vs-herdr.md)
- [Clawboo vs OpenCode](https://www.anchorterminal.com/compare/clawboo-vs-opencode.md)
- [CLI Manager vs herdr](https://www.anchorterminal.com/compare/cli-manager-vs-herdr.md)
- [CLI Manager vs OpenCode](https://www.anchorterminal.com/compare/cli-manager-vs-opencode.md)
- [Cline vs herdr](https://www.anchorterminal.com/compare/cline-vs-herdr.md)
- [Conductor vs herdr](https://www.anchorterminal.com/compare/conductor-vs-herdr.md)
- [Crush vs herdr](https://www.anchorterminal.com/compare/crush-vs-herdr.md)
- [DeepSeek Harness (dsh) vs herdr](https://www.anchorterminal.com/compare/deepseek-harness-vs-herdr.md)
- [dsh-superagent (DeepSeek) vs herdr](https://www.anchorterminal.com/compare/deepseek-superagent-vs-herdr.md)
- [Devin vs herdr](https://www.anchorterminal.com/compare/devin-vs-herdr.md)
- [Droid CLI vs herdr](https://www.anchorterminal.com/compare/droid-cli-vs-herdr.md)
- [Emdash vs herdr](https://www.anchorterminal.com/compare/emdash-vs-herdr.md)
- [Friday vs herdr](https://www.anchorterminal.com/compare/friday-work-vs-herdr.md)
- [Friday vs OpenCode](https://www.anchorterminal.com/compare/friday-work-vs-opencode.md)
- [Gemini CLI vs herdr](https://www.anchorterminal.com/compare/gemini-cli-vs-herdr.md)
- [GitHub Copilot CLI vs herdr](https://www.anchorterminal.com/compare/github-copilot-cli-vs-herdr.md)
- [goose vs herdr](https://www.anchorterminal.com/compare/goose-vs-herdr.md)
- [Harness vs herdr](https://www.anchorterminal.com/compare/harness-autonomous-vs-herdr.md)
- [Harness vs OpenCode](https://www.anchorterminal.com/compare/harness-autonomous-vs-opencode.md)
- [HarnessRouter vs herdr](https://www.anchorterminal.com/compare/harnessrouter-vs-herdr.md)
- [herdr vs Jules](https://www.anchorterminal.com/compare/herdr-vs-jules.md)
- [herdr vs Junie CLI](https://www.anchorterminal.com/compare/herdr-vs-junie.md)
- [herdr vs Kilo Code CLI](https://www.anchorterminal.com/compare/herdr-vs-kilo-code-cli.md)
- [herdr vs Kimi Code CLI](https://www.anchorterminal.com/compare/herdr-vs-kimi-code-cli.md)
- [herdr vs Kiro CLI](https://www.anchorterminal.com/compare/herdr-vs-kiro-cli.md)
- [herdr vs Letta](https://www.anchorterminal.com/compare/herdr-vs-letta.md)
- [herdr vs MiniMax Code](https://www.anchorterminal.com/compare/herdr-vs-minimax-code.md)
- [herdr vs Mistral Vibe CLI](https://www.anchorterminal.com/compare/herdr-vs-mistral-vibe-cli.md)
- [herdr vs Muse Code](https://www.anchorterminal.com/compare/herdr-vs-muse-code.md)
- [herdr vs OpenHands](https://www.anchorterminal.com/compare/herdr-vs-openhands.md)
- [herdr vs OpenMausBot](https://www.anchorterminal.com/compare/herdr-vs-openmausbot.md)
- [herdr vs Orca](https://www.anchorterminal.com/compare/herdr-vs-orca.md)
- [herdr vs Paperclip](https://www.anchorterminal.com/compare/herdr-vs-paperclip.md)
- [herdr vs Parallax](https://www.anchorterminal.com/compare/herdr-vs-parallax-agents.md)
- [herdr vs Paseo](https://www.anchorterminal.com/compare/herdr-vs-paseo.md)
- [herdr vs Prime Agent](https://www.anchorterminal.com/compare/herdr-vs-prime-agent.md)
- [herdr vs Qoder CLI](https://www.anchorterminal.com/compare/herdr-vs-qoder-cli.md)
- [herdr vs Qwen Code](https://www.anchorterminal.com/compare/herdr-vs-qwen-code.md)
- [herdr vs Mirror CLI](https://www.anchorterminal.com/compare/herdr-vs-reflection-mirror.md)
- [herdr vs Rovo Dev CLI](https://www.anchorterminal.com/compare/herdr-vs-rovo-dev-cli.md)
- [herdr vs Sculptor](https://www.anchorterminal.com/compare/herdr-vs-sculptor.md)
- [herdr vs T3 Code](https://www.anchorterminal.com/compare/herdr-vs-t3-code.md)
- [herdr vs Traycer](https://www.anchorterminal.com/compare/herdr-vs-traycer.md)
- [herdr vs Unstoppable](https://www.anchorterminal.com/compare/herdr-vs-unstoppable.md)
- [herdr vs Verdent](https://www.anchorterminal.com/compare/herdr-vs-verdent.md)
- [herdr vs Vibe-Trading](https://www.anchorterminal.com/compare/herdr-vs-vibe-trading.md)
- [herdr vs Warp (Warp Agent CLI and the Oz Agent API)](https://www.anchorterminal.com/compare/herdr-vs-warp.md)
- [OpenCode vs Paperclip](https://www.anchorterminal.com/compare/opencode-vs-paperclip.md)
- [OpenCode vs Parallax](https://www.anchorterminal.com/compare/opencode-vs-parallax-agents.md)

---

Query this catalogue directly over MCP: https://www.anchorterminal.com/mcp (Streamable HTTP, no key). How: https://www.anchorterminal.com/agents/#mcp
