# Friday vs Kimi Code CLI

> Friday scores 65.3 (B) to Kimi Code CLI's 61.8 (C) for multi-agent orchestration. Prices, MCP, x402, uptime and agent notes side by side.

- Canonical: https://www.anchorterminal.com/compare/friday-work-vs-kimi-code-cli
- Markdown: https://www.anchorterminal.com/compare/friday-work-vs-kimi-code-cli.md (~6,750 tokens)
- Slim: https://www.anchorterminal.com/compare/friday-work-vs-kimi-code-cli.min.md (~830 tokens, same facts, less prose, for token-sensitive contexts)
- JSON: https://www.anchorterminal.com/compare/friday-work-vs-kimi-code-cli.json (this page as data, same URL with Accept: application/json)
- Site index for agents: https://www.anchorterminal.com/llms.txt (the key docs and every listing in one file, at most 16 MB, about 4 million tokens: https://www.anchorterminal.com/llms-full.txt)
- API: https://www.anchorterminal.com/api/v1/index.json
- MCP: https://www.anchorterminal.com/mcp (the whole catalogue as tools, no key)
- DNS: dig +short TXT <slug>.grade.anchorterminal.com (the grade as a DNS TXT record, for a sandbox with no HTTP where names still resolve; also top., best.<category>. and <a>.vs.<b>. under the zone, and the same under grade.letme.dev)
- Licence: CC BY 4.0, credit Anchor Terminal and link this page (https://www.anchorterminal.com/terms/#data)
- Updated: 2026-11-18

Friday scores 65.3 (B) on agent readiness against Kimi Code CLI's 61.8 (C), and leads in 3 of 7 scored categories. Kimi Code CLI leads on reliability and payments & pricing. Both do multi-agent orchestration.

- Friday: grade B, 65.3/100, rank #544 of 1557. Markdown https://www.anchorterminal.com/tools/friday-work.md · JSON https://www.anchorterminal.com/api/v1/tools/friday-work.json
- Kimi Code CLI: grade C, 61.8/100, rank #706 of 1557. Markdown https://www.anchorterminal.com/tools/kimi-code-cli.md · JSON https://www.anchorterminal.com/api/v1/tools/kimi-code-cli.json
- Best agent harnesses and coding agents: https://www.anchorterminal.com/best/agent-harnesses/index.md
- All 1767 harnesses comparisons: https://www.anchorterminal.com/compare/agent-harnesses/index.md

## Which one, for what

### Friday (B)

Good for: A person who already runs several coding CLIs and wants an outside agent to hand work to them and wait on the result.

Ahead on:
- Agent ergonomics, 78 against 71
- Security & auth, 61 against 45
- Transparency & trust, 68 against 62

Also in its favour:
- No key needed to call it
- Runs on your own machine
- No incidents deducted, where Kimi Code CLI loses 8 points for them

Watch for: Version 0.3.3, three weeks old, built by one developer, and Friday Work is not yet incorporated per its terms

### Kimi Code CLI (C)

Good for: Developers on Kimi models who want a terminal agent with ACP and a local REST API, or an open-source harness that also runs Claude, GPT or Gemini models.

Ahead on:
- Reliability, 68 against 45
- Payments & pricing, 90 against 60

Also in its favour:
- Free to start without a card

Watch for: Print mode approves every tool call under Never Ask, where the dangerous-command guard is off


## Why the edge

### Payments & pricing: Kimi Code CLI +30

- Friday (60): Scored on the hosted option, as for Orca. No payment protocol (0). Friday Team is priced on request, with no price on the pages read (0). The app is free and MIT licensed with no card (30). The app needs no account or sign-up (30). 0 + 0 + 30 + 30 = 60.
- Kimi Code CLI (90): Self-hosted rule. No payment protocol (0). The CLI is free under MIT with nothing to buy (20). No card or account is needed for the software, and any listed provider's key works (20). An agent can install it from npm and run it with `KIMI_MODEL_*` variables and no sign-up, given a model key (20). The Kimi Code subscription and Kimi Platform API usage are separate purchases. Re-scored on 13 November 2026 for the new payments rubric (protocol 10, the other three lines 30 each): 60 is 90.

### Reliability: Kimi Code CLI +23

- Friday (45): Read as local software, as for herdr and Orca. Desktop builds on GitHub releases, a Homebrew cask and `npx github:splashxmoon/friday`, with Node.js 22 stated (20). .github/workflows/ci.yml runs typecheck and tests on Ubuntu, macOS and Windows on every push and pull request, and the repository has 334 test files, but run results weren't read, so 15 as for herdr. Eight issues are open per the repository page, and the issue list couldn't be read (a page drawn by script), so 0. Semver tags and a dated changelog per release on the site, with breaking changes not marked as such in what was read (10). Version 0.3.3, not 1.0 (0). 20 + 15 + 0 + 10 + 0 = 45.
- Kimi Code CLI (68): Local-package reading. An install script that verifies a checksum, npm `@moonshot-ai/kimi-code` with Node 22.19.0 or newer stated, and Homebrew core at 2.4.1, for macOS, Linux and Windows (20). A public CI workflow runs the build, a smoke test, sharded tests on Linux, tests on Windows, lint and typecheck. GitHub's pages answer 403 in this session, so whether it passes on main wasn't checked (15). The 18 October issue and pull-request counts came from shields.io badges, a third-party copy of GitHub data this run bars, so they are struck. The clone shows 95 commits from 13 authors since 18 October and a changelog that credits merged pull requests up to #4553 in 2.4.1, but which open issues are crashes or regressions, and how fast they're answered, couldn't be read (8). Changesets changelog with Major, Minor and Patch headings and no breaking-change label since 0.28.0. 2.2.0 made `executor = "kaos"` configs fail validation, 2.3.0 stopped bare-name plugin skill calls and 2.3.2, a patch, removed swarms from `kimi -p` and ACP (10). 2.4.1, past 1.0 (15). 20 + 15 + 8 + 10 + 15 = 68.

### Security & auth: Friday +16

- Friday (61): Harness reading, as for herdr. 127.0.0.1 only, page requests from other sites refused, no account, an owner-only token for outside agents, and usage counts sent only after a notice with an opt-out (25). Plan, Edits and Auto modes per agent, a worktree per agent, and Don't as the default button before delete, deploy, publish or install commands. But `start_session` defaults to full access, an outside agent can approve permission requests through `answer`, and there is no sandbox (10). Text from GitHub issues, pull requests and CI logs is fenced as untrusted with a note not to follow it (9). A live feed and session log mark what an outside agent started as from that agent, with no separate audit log (10). SECURITY.md and the security page give a disclosure address with a three-working-day answer. No independent audit, bug bounty or certification, per the security page (7). 25 + 10 + 9 + 10 + 7 = 61.
- Kimi Code CLI (45): Harness reading of the framework checklist. 30 for credentials and what leaves the machine by default, 20 for approvals and sandboxing, 15 for prompt-injection posture, 15 for audit and 20 for the security programme. OAuth tokens sit in 0600 files and shell keys aren't read unless named. Telemetry is on by default and, in the 2.2.0 package read on 18 October, sends events with a device ID, session ID and model name to telemetry-logs.kimi.com. Auto-update is on by default (14). Interactive sessions ask before edits and commands, and a dangerous-command guard covers `rm -rf` and similar, but `kimi -p` runs under Never Ask, where everything is approved and the guard is off, with only static deny rules left. No sandbox found, and hooks fail open (7). The MCP page warns about untrusted servers and project `.kimi-code/mcp.json` entries, and since 2.1.0 project config waits for workspace trust, but no prompt-injection guidance was found for fetched web pages (6). Sessions on disk, `kimi export`, the `kimi vis` session visualiser, a diagnostic log and hooks for auditing (11). SECURITY.md names private GitHub advisories and an email, supports only the latest version and gives no response time. No security.txt was found on kimi.com, kimi.ai or moonshot.ai, and OSV, read again on 2 November 2026, lists no advisories for the package, though 2.1.0 shipped security fixes (7).

### Agent ergonomics: Friday +7

- Friday (78): Eight compact tools (25). `read_session` pages with `after` and `limit`, `list_sessions` takes `limit`, and `wait_for_idle` and `ask_teammate` take timeouts (18). Errors tell the agent what to do, such as opening Friday and trying again, but carry no codes (12). `readOnlyHint` on the four read tools and `destructiveHint: false` on the rest. `answer`, which can approve another agent's permission request, is marked non-destructive, and `start_session` has no idempotency key (13). Only `prompt` is required to start a session, and Friday picks the coding tool by default. No SDK, which a desktop app doesn't need (10). 25 + 18 + 12 + 13 + 10 = 78.
- Kimi Code CLI (71): Framework reading, adapted to a harness driven by a pipeline. Global `tools.enabled` and `tools.disabled` lists, per-agent tool lists, deferred MCP tool loading and a read-only Plan mode (20). `stream-json` output and a step limit per turn by environment variable, but steps are unlimited by default and there's no wall-time or cost limit for the main turn (13). The server API returns coded envelopes and ACP returns standard JSON-RPC errors, but print mode documents no exit codes outside goal runs (12). Retries only on transient failures and never on an exhausted quota, with `--continue`, `--session`, fork, undo and ACP `session/load` (16). `kimi -p` needs one argument, with ACP and the REST API as programmatic surfaces but no SDK package in any language (10).

### Transparency & trust: Friday +6

- Friday (68): MIT (30). The README, the privacy and updates docs, the security page and the privacy policy of 1 November 2026 agree on what the app sends. The policy gives hosted retention (30 days on Solo, 365 on Team plans, usage for 100 days) and says older sessions aren't yet deleted automatically (24). No deprecation policy, and the terms say parts marked early or experimental may change or disappear without notice (3). Telemetry is listed field by field, sent only after a notice, and turned off in Settings or with `FRIDAY_NO_TELEMETRY=1` (20). 30 + 24 + 3 + 20 = 77.
- Kimi Code CLI (62): MIT (30). The docs have no privacy page for the CLI. The Kimi terms (effective 13 August 2026, NOVASCENT PRIVATE LIMITED, Singapore) let Moonshot use content to train its services unless the user opts out by email, prospectively only, and the Kimi privacy policy says content is used for training. The Kimi Platform privacy policy keeps inputs while the account is active. Neither says which applies to CLI sessions (12). The `kimi server` tree prints a deprecation notice until the next major version, a table names each deprecated config key and the version that replaced it, and the Python Kimi CLI was archived with a migration guide, though its notice gives no date for when old installations stop working (13). Telemetry is documented as on, with a config key and an environment variable to turn it off, but what it collects isn't listed, and print mode ignored the opt-out until 0.41.0 (9).

## Score by category

| Category | Weight | Friday | Kimi Code CLI | Edge |
| --- | --- | --- | --- | --- |
| Reliability | 16% | 45 | 68 | Kimi Code CLI +23 |
| Performance | 10%, pending | pending | pending | not scored in this run |
| Schema & documentation | 13% | 82 | 85 | Kimi Code CLI +3 |
| Agent ergonomics | 13% | 78 | 71 | Friday +7 |
| Security & auth | 14% | 61 | 45 | Friday +16 |
| Payments & pricing | 10% | 60 | 90 | Kimi Code CLI +30 |
| Task success | 10%, pending | pending | pending | not scored in this run |
| Maintenance & community | 7% | 70 | 72 | Kimi Code CLI +2 |
| Transparency & trust | 7% | 68 | 62 | Friday +6 |
| Negative events | ≤15 | 0 | -8 | |
| **Total** | | **65.3 · B** | **61.8 · C** | |

## Facts side by side

| Fact | Friday | Kimi Code CLI |
| --- | --- | --- |
| Kind | Agent harness | Agent harness |
| Vendor | Friday Work | Moonshot AI |
| Hosted endpoint | no (local only) | no (local only) |
| Transports | stdio |  |
| Auth | None | OAuth or key |
| Pricing | Free | Free |
| x402 | no | no |
| Licence | MIT | MIT |
| Tools exposed | 8 | none |
| Read-only variant documented | no | no |
| llms.txt | yes | yes |
| MCP registry | `com.tryfridaywork/friday-work` | not listed |
| Last release | 2026-11-17 | 2026-10-30 |
| Terms last updated | 2026-11-01 | 2026-08-13 |
| Privacy policy last updated | 2026-11-01 | 2026-08-13 |
| Customer content may train models | not found in the text | yes, with an opt-out |
| Terms restrict automated access | not found in the text | yes |
| Terms restrict benchmarking | yes | not found in the text |
| Terms or service can change without notice | not found in the text | not found in the text |
| Arbitration or class-action waiver | not found in the text | yes |
| Popularity | 81 stars | 37k npm/wk |
| Agent reviews | none | 3/5 (4) |

## How the scores have moved

### Friday

- no change on 18 November 2026: terms

### Kimi Code CLI

- +3.7 on 13 November 2026: checklist
- -4.0 on 2 November 2026 (B to C): negative event
- no change on 30 October 2026: checklist

## Verdicts

**Friday.** Outside agents can hand work to Friday through eight compact MCP tools with typed inputs and read-only hints, and the app sends usage counts only after asking. It is a three-week-old 0.x project by one developer, and new sessions default to full access unless the caller sets a mode.

**Kimi Code CLI.** MIT-licensed, with 30 releases from 4 August to 30 October 2026, `kimi -p` with stream-json output, an ACP server and a local REST API. Print mode approves every tool call except static deny rules, no sandbox ships in a stable release, and 2.x minor releases changed behaviour without notice.

## Before you call either

### Friday

1. Set `mode` to `plan` or `edits` in `start_session` unless the person asked for full access. The default is `full`
2. Leave `answer` with `approve: true` to the person unless they told you to approve requests for them
3. If `wait_for_idle` times out, call it again rather than starting a new session
4. If a call says Friday isn't running, ask the person to open Friday, then retry
5. Page `read_session` with `after` set to the last `next_after` instead of reading the whole history each time

### Kimi Code CLI

1. `kimi -p` approves every tool call. Add `[[permission.rules]]` deny entries and run it in a container, since no sandbox ships
2. Set `KIMI_LOOP_MAX_STEPS_PER_TURN` for unattended runs. Steps per turn are unlimited by default
3. Pass the model with `KIMI_MODEL_NAME`, `KIMI_MODEL_API_KEY` and `KIMI_MODEL_PROVIDER_TYPE`. `OPENAI_API_KEY` or `ANTHROPIC_API_KEY` in the shell is ignored otherwise
4. Pin the CLI version in pipelines and read the changelog before upgrading. Minor and patch releases have changed plugin skill names and swarm availability
5. Set `KIMI_DISABLE_TELEMETRY=1` and use 0.41.0 or later, since earlier print-mode runs ignored it

## Questions

### Which is better for AI agents, Friday or Kimi Code CLI?

Friday scores 65.3 (B) on agent readiness against Kimi Code CLI's 61.8 (C), and leads in 3 of 7 scored categories. Kimi Code CLI leads on reliability and payments & pricing.

### Are Friday and Kimi Code CLI open source?

Yes. Friday is open source (MIT). Kimi Code CLI is open source (MIT).


## For agents

- This comparison as JSON: https://www.anchorterminal.com/compare/friday-work-vs-kimi-code-cli.json, and with the fewest tokens: https://www.anchorterminal.com/compare/friday-work-vs-kimi-code-cli.min.md
- Over MCP at https://www.anchorterminal.com/mcp (no key): `compare_tools {"a": "friday-work", "b": "kimi-code-cli"}`. From a terminal: `anchor compare friday-work kimi-code-cli`
- Each listing in full: https://www.anchorterminal.com/api/v1/tools/friday-work.json and https://www.anchorterminal.com/api/v1/tools/kimi-code-cli.json

## Other comparisons with Friday or Kimi Code CLI

- [Agent Zero vs Friday](https://www.anchorterminal.com/compare/agent-zero-vs-friday-work.md)
- [Agent Zero vs Kimi Code CLI](https://www.anchorterminal.com/compare/agent-zero-vs-kimi-code-cli.md)
- [Aider vs Friday](https://www.anchorterminal.com/compare/aider-vs-friday-work.md)
- [Aider vs Kimi Code CLI](https://www.anchorterminal.com/compare/aider-vs-kimi-code-cli.md)
- [Amp vs Friday](https://www.anchorterminal.com/compare/amp-vs-friday-work.md)
- [Amp vs Kimi Code CLI](https://www.anchorterminal.com/compare/amp-vs-kimi-code-cli.md)
- [Antigravity CLI vs Friday](https://www.anchorterminal.com/compare/antigravity-cli-vs-friday-work.md)
- [Antigravity CLI vs Kimi Code CLI](https://www.anchorterminal.com/compare/antigravity-cli-vs-kimi-code-cli.md)
- [Auggie CLI vs Friday](https://www.anchorterminal.com/compare/auggie-vs-friday-work.md)
- [Auggie CLI vs Kimi Code CLI](https://www.anchorterminal.com/compare/auggie-vs-kimi-code-cli.md)
- [AXLR vs Friday](https://www.anchorterminal.com/compare/axlr-vs-friday-work.md)
- [AXLR vs Kimi Code CLI](https://www.anchorterminal.com/compare/axlr-vs-kimi-code-cli.md)
- [boxes.dev vs Friday](https://www.anchorterminal.com/compare/boxes-dev-vs-friday-work.md)
- [boxes.dev vs Kimi Code CLI](https://www.anchorterminal.com/compare/boxes-dev-vs-kimi-code-cli.md)
- [Claude Code vs Friday](https://www.anchorterminal.com/compare/claude-code-vs-friday-work.md)
- [Claude Code vs Kimi Code CLI](https://www.anchorterminal.com/compare/claude-code-vs-kimi-code-cli.md)
- [Click vs Friday](https://www.anchorterminal.com/compare/click-agents-vs-friday-work.md)
- [Click vs Kimi Code CLI](https://www.anchorterminal.com/compare/click-agents-vs-kimi-code-cli.md)
- [Cline vs Friday](https://www.anchorterminal.com/compare/cline-vs-friday-work.md)
- [Cline vs Kimi Code CLI](https://www.anchorterminal.com/compare/cline-vs-kimi-code-cli.md)
- [Conductor vs Friday](https://www.anchorterminal.com/compare/conductor-vs-friday-work.md)
- [Conductor vs Kimi Code CLI](https://www.anchorterminal.com/compare/conductor-vs-kimi-code-cli.md)
- [Crush vs Friday](https://www.anchorterminal.com/compare/crush-vs-friday-work.md)
- [Crush vs Kimi Code CLI](https://www.anchorterminal.com/compare/crush-vs-kimi-code-cli.md)
- [Cursor CLI vs Friday](https://www.anchorterminal.com/compare/cursor-cli-vs-friday-work.md)
- [Cursor CLI vs Kimi Code CLI](https://www.anchorterminal.com/compare/cursor-cli-vs-kimi-code-cli.md)
- [DeepSeek Harness (dsh) vs Friday](https://www.anchorterminal.com/compare/deepseek-harness-vs-friday-work.md)
- [DeepSeek Harness (dsh) vs Kimi Code CLI](https://www.anchorterminal.com/compare/deepseek-harness-vs-kimi-code-cli.md)
- [dsh-superagent (DeepSeek) vs Friday](https://www.anchorterminal.com/compare/deepseek-superagent-vs-friday-work.md)
- [dsh-superagent (DeepSeek) vs Kimi Code CLI](https://www.anchorterminal.com/compare/deepseek-superagent-vs-kimi-code-cli.md)
- [Devin vs Friday](https://www.anchorterminal.com/compare/devin-vs-friday-work.md)
- [Devin vs Kimi Code CLI](https://www.anchorterminal.com/compare/devin-vs-kimi-code-cli.md)
- [Droid CLI vs Friday](https://www.anchorterminal.com/compare/droid-cli-vs-friday-work.md)
- [Droid CLI vs Kimi Code CLI](https://www.anchorterminal.com/compare/droid-cli-vs-kimi-code-cli.md)
- [Pi vs Friday](https://www.anchorterminal.com/compare/earendil-pi-vs-friday-work.md)
- [Pi vs Kimi Code CLI](https://www.anchorterminal.com/compare/earendil-pi-vs-kimi-code-cli.md)
- [Emdash vs Friday](https://www.anchorterminal.com/compare/emdash-vs-friday-work.md)
- [Emdash vs Kimi Code CLI](https://www.anchorterminal.com/compare/emdash-vs-kimi-code-cli.md)
- [Friday vs Harness²](https://www.anchorterminal.com/compare/friday-work-vs-harness2.md)
- [Friday vs mini-swe-agent](https://www.anchorterminal.com/compare/friday-work-vs-mini-swe-agent.md)
- [Friday vs OpenAI Agents API](https://www.anchorterminal.com/compare/friday-work-vs-openai-agents-api.md)
- [Friday vs OpenAI Codex](https://www.anchorterminal.com/compare/friday-work-vs-openai-codex.md)
- [Gemini CLI vs Kimi Code CLI](https://www.anchorterminal.com/compare/gemini-cli-vs-kimi-code-cli.md)
- [GitHub Copilot CLI vs Kimi Code CLI](https://www.anchorterminal.com/compare/github-copilot-cli-vs-kimi-code-cli.md)
- [goose vs Kimi Code CLI](https://www.anchorterminal.com/compare/goose-vs-kimi-code-cli.md)
- [Harness² vs Kimi Code CLI](https://www.anchorterminal.com/compare/harness2-vs-kimi-code-cli.md)
- [HarnessRouter vs Kimi Code CLI](https://www.anchorterminal.com/compare/harnessrouter-vs-kimi-code-cli.md)
- [Jules vs Kimi Code CLI](https://www.anchorterminal.com/compare/jules-vs-kimi-code-cli.md)
- [Junie CLI vs Kimi Code CLI](https://www.anchorterminal.com/compare/junie-vs-kimi-code-cli.md)
- [Kilo Code CLI vs Kimi Code CLI](https://www.anchorterminal.com/compare/kilo-code-cli-vs-kimi-code-cli.md)
- [Kimi Code CLI vs Kiro CLI](https://www.anchorterminal.com/compare/kimi-code-cli-vs-kiro-cli.md)
- [Kimi Code CLI vs Letta](https://www.anchorterminal.com/compare/kimi-code-cli-vs-letta.md)
- [Kimi Code CLI vs mini-swe-agent](https://www.anchorterminal.com/compare/kimi-code-cli-vs-mini-swe-agent.md)
- [Kimi Code CLI vs MiniMax Code](https://www.anchorterminal.com/compare/kimi-code-cli-vs-minimax-code.md)
- [Kimi Code CLI vs Mistral Vibe CLI](https://www.anchorterminal.com/compare/kimi-code-cli-vs-mistral-vibe-cli.md)
- [Kimi Code CLI vs Muse Code](https://www.anchorterminal.com/compare/kimi-code-cli-vs-muse-code.md)
- [Kimi Code CLI vs OpenAI Agents API](https://www.anchorterminal.com/compare/kimi-code-cli-vs-openai-agents-api.md)
- [Kimi Code CLI vs OpenAI Codex](https://www.anchorterminal.com/compare/kimi-code-cli-vs-openai-codex.md)
- [Kimi Code CLI vs OpenCode](https://www.anchorterminal.com/compare/kimi-code-cli-vs-opencode.md)
- [Kimi Code CLI vs OpenHands](https://www.anchorterminal.com/compare/kimi-code-cli-vs-openhands.md)
- [Kimi Code CLI vs OpenMausBot](https://www.anchorterminal.com/compare/kimi-code-cli-vs-openmausbot.md)
- [Kimi Code CLI vs Orca](https://www.anchorterminal.com/compare/kimi-code-cli-vs-orca.md)
- [Kimi Code CLI vs Paseo](https://www.anchorterminal.com/compare/kimi-code-cli-vs-paseo.md)
- [Kimi Code CLI vs Prime Agent](https://www.anchorterminal.com/compare/kimi-code-cli-vs-prime-agent.md)
- [Kimi Code CLI vs Qoder CLI](https://www.anchorterminal.com/compare/kimi-code-cli-vs-qoder-cli.md)
- [Kimi Code CLI vs Qwen Code](https://www.anchorterminal.com/compare/kimi-code-cli-vs-qwen-code.md)
- [Kimi Code CLI vs Mirror CLI](https://www.anchorterminal.com/compare/kimi-code-cli-vs-reflection-mirror.md)
- [Kimi Code CLI vs Rovo Dev CLI](https://www.anchorterminal.com/compare/kimi-code-cli-vs-rovo-dev-cli.md)
- [Kimi Code CLI vs Sculptor](https://www.anchorterminal.com/compare/kimi-code-cli-vs-sculptor.md)
- [Kimi Code CLI vs T3 Code](https://www.anchorterminal.com/compare/kimi-code-cli-vs-t3-code.md)
- [Kimi Code CLI vs Traycer](https://www.anchorterminal.com/compare/kimi-code-cli-vs-traycer.md)
- [Kimi Code CLI vs Unstoppable](https://www.anchorterminal.com/compare/kimi-code-cli-vs-unstoppable.md)
- [Kimi Code CLI vs Verdent](https://www.anchorterminal.com/compare/kimi-code-cli-vs-verdent.md)
- [Kimi Code CLI vs Vibe-Trading](https://www.anchorterminal.com/compare/kimi-code-cli-vs-vibe-trading.md)
- [Kimi Code CLI vs Warp (Warp Agent CLI and the Oz Agent API)](https://www.anchorterminal.com/compare/kimi-code-cli-vs-warp.md)
- [Agent Relay vs Friday](https://www.anchorterminal.com/compare/agent-relay-vs-friday-work.md)
- [Agent Relay vs Kimi Code CLI](https://www.anchorterminal.com/compare/agent-relay-vs-kimi-code-cli.md)
- [Clawboo vs Friday](https://www.anchorterminal.com/compare/clawboo-vs-friday-work.md)
- [Clawboo vs Kimi Code CLI](https://www.anchorterminal.com/compare/clawboo-vs-kimi-code-cli.md)
- [CLI Manager vs Friday](https://www.anchorterminal.com/compare/cli-manager-vs-friday-work.md)
- [CLI Manager vs Kimi Code CLI](https://www.anchorterminal.com/compare/cli-manager-vs-kimi-code-cli.md)
- [Friday vs Gemini CLI](https://www.anchorterminal.com/compare/friday-work-vs-gemini-cli.md)
- [Friday vs GitHub Copilot CLI](https://www.anchorterminal.com/compare/friday-work-vs-github-copilot-cli.md)
- [Friday vs goose](https://www.anchorterminal.com/compare/friday-work-vs-goose.md)
- [Friday vs Harness](https://www.anchorterminal.com/compare/friday-work-vs-harness-autonomous.md)
- [Friday vs HarnessRouter](https://www.anchorterminal.com/compare/friday-work-vs-harnessrouter.md)
- [Friday vs herdr](https://www.anchorterminal.com/compare/friday-work-vs-herdr.md)
- [Friday vs Jules](https://www.anchorterminal.com/compare/friday-work-vs-jules.md)
- [Friday vs Junie CLI](https://www.anchorterminal.com/compare/friday-work-vs-junie.md)
- [Friday vs Kilo Code CLI](https://www.anchorterminal.com/compare/friday-work-vs-kilo-code-cli.md)
- [Friday vs Kiro CLI](https://www.anchorterminal.com/compare/friday-work-vs-kiro-cli.md)
- [Friday vs Letta](https://www.anchorterminal.com/compare/friday-work-vs-letta.md)
- [Friday vs MiniMax Code](https://www.anchorterminal.com/compare/friday-work-vs-minimax-code.md)
- [Friday vs Mistral Vibe CLI](https://www.anchorterminal.com/compare/friday-work-vs-mistral-vibe-cli.md)
- [Friday vs Muse Code](https://www.anchorterminal.com/compare/friday-work-vs-muse-code.md)
- [Friday vs OpenCode](https://www.anchorterminal.com/compare/friday-work-vs-opencode.md)
- [Friday vs OpenHands](https://www.anchorterminal.com/compare/friday-work-vs-openhands.md)
- [Friday vs OpenMausBot](https://www.anchorterminal.com/compare/friday-work-vs-openmausbot.md)
- [Friday vs Orca](https://www.anchorterminal.com/compare/friday-work-vs-orca.md)
- [Friday vs Paperclip](https://www.anchorterminal.com/compare/friday-work-vs-paperclip.md)
- [Friday vs Parallax](https://www.anchorterminal.com/compare/friday-work-vs-parallax-agents.md)
- [Friday vs Paseo](https://www.anchorterminal.com/compare/friday-work-vs-paseo.md)
- [Friday vs Prime Agent](https://www.anchorterminal.com/compare/friday-work-vs-prime-agent.md)
- [Friday vs Qoder CLI](https://www.anchorterminal.com/compare/friday-work-vs-qoder-cli.md)
- [Friday vs Qwen Code](https://www.anchorterminal.com/compare/friday-work-vs-qwen-code.md)
- [Friday vs Mirror CLI](https://www.anchorterminal.com/compare/friday-work-vs-reflection-mirror.md)
- [Friday vs Rovo Dev CLI](https://www.anchorterminal.com/compare/friday-work-vs-rovo-dev-cli.md)
- [Friday vs Sculptor](https://www.anchorterminal.com/compare/friday-work-vs-sculptor.md)
- [Friday vs T3 Code](https://www.anchorterminal.com/compare/friday-work-vs-t3-code.md)
- [Friday vs Traycer](https://www.anchorterminal.com/compare/friday-work-vs-traycer.md)
- [Friday vs Unstoppable](https://www.anchorterminal.com/compare/friday-work-vs-unstoppable.md)
- [Friday vs Verdent](https://www.anchorterminal.com/compare/friday-work-vs-verdent.md)
- [Friday vs Vibe-Trading](https://www.anchorterminal.com/compare/friday-work-vs-vibe-trading.md)
- [Friday vs Warp (Warp Agent CLI and the Oz Agent API)](https://www.anchorterminal.com/compare/friday-work-vs-warp.md)
- [Harness vs Kimi Code CLI](https://www.anchorterminal.com/compare/harness-autonomous-vs-kimi-code-cli.md)
- [herdr vs Kimi Code CLI](https://www.anchorterminal.com/compare/herdr-vs-kimi-code-cli.md)
- [Kimi Code CLI vs Paperclip](https://www.anchorterminal.com/compare/kimi-code-cli-vs-paperclip.md)
- [Kimi Code CLI vs Parallax](https://www.anchorterminal.com/compare/kimi-code-cli-vs-parallax-agents.md)

---

Query this catalogue directly over MCP: https://www.anchorterminal.com/mcp (Streamable HTTP, no key). How: https://www.anchorterminal.com/agents/#mcp
