# Emdash vs herdr

> herdr scores 71.1 (BB) to Emdash's 57.6 (C) for multi-agent orchestration. Prices, MCP, x402, uptime and agent notes side by side.

- Canonical: https://www.anchorterminal.com/compare/emdash-vs-herdr
- Markdown: https://www.anchorterminal.com/compare/emdash-vs-herdr.md (~5,450 tokens)
- Slim: https://www.anchorterminal.com/compare/emdash-vs-herdr.min.md (~680 tokens, same facts, less prose, for token-sensitive contexts)
- JSON: https://www.anchorterminal.com/compare/emdash-vs-herdr.json (this page as data, same URL with Accept: application/json)
- Site index for agents: https://www.anchorterminal.com/llms.txt (the key docs and every listing in one file, at most 16 MB, about 4 million tokens: https://www.anchorterminal.com/llms-full.txt)
- API: https://www.anchorterminal.com/api/v1/index.json
- MCP: https://www.anchorterminal.com/mcp (the whole catalogue as tools, no key)
- DNS: dig +short TXT <slug>.grade.anchorterminal.com (the grade as a DNS TXT record, for a sandbox with no HTTP where names still resolve; also top., best.<category>. and <a>.vs.<b>. under the zone, and the same under grade.letme.dev)
- Licence: CC BY 4.0, credit Anchor Terminal and link this page (https://www.anchorterminal.com/terms/#data)
- Updated: 2026-11-18

herdr scores 71.1 (BB) on agent readiness against Emdash's 57.6 (C), and leads in 5 of 7 scored categories. Emdash leads on maintenance & community. Both do multi-agent orchestration.

- Emdash: grade C, 57.6/100, rank #883 of 1557. Markdown https://www.anchorterminal.com/tools/emdash.md · JSON https://www.anchorterminal.com/api/v1/tools/emdash.json
- herdr: grade BB, 71.1/100, rank #279 of 1557. Markdown https://www.anchorterminal.com/tools/herdr.md · JSON https://www.anchorterminal.com/api/v1/tools/herdr.json
- Best agent harnesses and coding agents: https://www.anchorterminal.com/best/agent-harnesses/index.md
- All 1767 harnesses comparisons: https://www.anchorterminal.com/compare/agent-harnesses/index.md

## Which one, for what

### Emdash (C)

Good for: Developers who want parallel agents in worktrees, fed from their issue tracker, locally or over SSH.

Ahead on:
- Maintenance & community, 70 against 63

Watch for: Telemetry on unless turned off in Settings or with TELEMETRY_ENABLED=false

### herdr (BB)

Good for: A developer who runs several coding agents in terminals, locally or over SSH, and wants one agent to start, prompt and wait on others.

Ahead on:
- Reliability, 65 against 55
- Schema & documentation, 91 against 55
- Agent ergonomics, 73 against 55
- Security & auth, 49 against 38
- Transparency & trust, 70 against 54

Also in its favour:
- Agent-ready, a grade of BB or better

Watch for: Version 0.9.5, not yet 1.0, and the last tagged release is 14 October 2026


## Why the edge

### Schema & documentation: herdr +36

- Emdash (55): Harness reading. Docs site and a workspace server package (55).
- herdr (91): Read as a CLI and socket API. `herdr api schema --json` prints a JSON Schema for requests, responses, errors and events, also at docs/next/api/herdr-api.schema.json (25). Markdown for agents, with skills/herdr/SKILL.md and distribution/agent-guide.md. https://herdr.dev/llms.txt indexes the 0.9.5 docs as raw source files for agents (10). The skill says when to use herdr and when not to, and the socket docs say which layer to use for which job, but the schema itself carries few descriptions (15). The schema has 49 enums and agent names are constrained by a pattern, while some inputs are free strings (12). Many CLI and JSON examples, a documented error shape with codes such as `not_found`, `agent_blocked` and `events_lost` (14). Versioned docs per release and a changelog (15). 25 + 10 + 15 + 12 + 14 + 15 = 91.

### Agent ergonomics: herdr +18

- Emdash (55): Harness reading. Issue intake from Linear, GitHub, Jira and others, diff review, pull requests and CI checks in one place, local or over SSH (55).
- herdr (73): Framework reading, how much an agent has to carry. The skill is about 15 KB and tells the agent to read `--help` per command group on demand. Reads take `--lines` and `--source recent` (20 of 25). Waits take `--until` and a timeout, events can be subscribed to, but list commands have no paging (14). Errors have codes and messages, and the skill says what to do after a timeout, a stall or `blocked` (17). `agent prompt --wait` submits and waits in one request to avoid a race, `agent.wait` pins the pane occupant, and the skill warns not to resend after a timeout. No idempotency keys (14). Most commands default to the caller's or focused pane. No SDK, only the CLI and raw socket (8). 20 + 14 + 17 + 14 + 8 = 73.

### Transparency & trust: herdr +16

- Emdash (54): Apache 2.0 (30). A telemetry page on the docs site (not read) (18 of 30). No deprecation policy (5). Disclosed with an opt-out (15 of 20). 30 + 18 + 5 + 15 = 68.
- herdr (70): Apache-2.0 (30). herdr.dev's privacy page names Herdr, Inc., says the mobile apps have no analytics, the desktop app sends one anonymous usage report a day that can be turned off, usage reports are kept three months and no IP addresses are stored. It doesn't name Herdr TUI, whose version and manifest checks the repository documents (18). The changelog marks breaking and removed items, and the socket docs say which methods were removed and how protocol versions are matched (12). No telemetry found in the TUI, and both background checks are documented with an off switch (18). 30 + 18 + 12 + 18 = 78.

### Security & auth: herdr +11

- Emdash (38): Harness reading. Telemetry is described as optional and disabled in Settings or with TELEMETRY_ENABLED=false, which reads as on by default (15 of 30). Worktree per task and remote machines over SSH (10 of 20). No prompt-injection guidance (5). No audit log (5). No security policy file found (3). 15 + 10 + 5 + 5 + 3 = 38.
- herdr (49): Harness reading of the framework checklist, as for Harness and agents-tree. 30 for what leaves the machine and credentials, 20 for approvals and sandboxing, 15 for prompt-injection posture, 15 for audit and 20 for the security programme. No account, no telemetry found in the source, and a socket file set to 0600. Version and manifest checks reach herdr.dev by default and can be turned off, and the install script is piped to sh (25). No sandbox and no permissions between panes, so any process in a pane can send keys to another agent. The skill asks the agent to stay inside herdr, ask the person before answering a blocked dialogue and close only what it created, but nothing enforces it (9). Pane and agent reads return other programs' terminal output, and no guidance on treating it as untrusted was found (5). A server log, but no per-call audit log found (5). No SECURITY.md or disclosure policy in the repository, and herdr.dev serves no security.txt. CI pins actions to commit SHAs and Dependabot is on (5). 25 + 9 + 5 + 5 + 5 = 49.

### Reliability: herdr +10

- Emdash (55): Local software. Homebrew cask and installers for macOS, Windows and Linux (20). A code-consistency check and release workflows; no test workflow found (10). GitHub issues and pull requests weren't read (GitHub's pages refuse these sessions), so that line is scored absent (0). Stable tags to v1.2.11, release notes on GitHub (10). Version 1.2.11 (15). 20 + 10 + 0 + 10 + 15 = 55.
- herdr (65): Read as local software, as for agents-tree and Harness. Official release binaries for Linux, macOS and Windows x86_64 with an install script, and Homebrew and mise in the README. The Homebrew formula wasn't read (20). .github/workflows/ci.yml runs checks and tests on ubuntu, macOS and Windows for every push and pull request, but run results couldn't be read from this session, so 15, the value this run gives public CI with unread results. 495 issues were open on 18 November 2026. The 25 newest, opened 15 to 18 November, all carry a triaged label and a priority (p1 or p2), several of them bugs, so reports are sorted within a day but many stay open (15). Semver tags and a Keep a Changelog file with Breaking Changes and Removed sections (15). Version 0.9.5, not 1.0, and not declared stable (0). 20 + 15 + 15 + 15 + 0 = 65.

### Maintenance & community: Emdash +7

- Emdash (70): v1.2.11 on 6 November 2026 (30). v1.2.9, v1.2.10 and v1.2.11 within two weeks (20). GitHub issues and pull requests weren't read (GitHub's pages refuse these sessions), so that line is scored absent (0). Current installers and Homebrew cask (15). Release workflows, no test CI (5). 30 + 20 + 0 + 15 + 5 = 70.
- herdr (63): v0.9.5 on 14 October 2026, 35 days before the check, and the last commit on master on 29 October (20). Six releases from 7 September to 14 October 2026 (20). 495 open issues and 26 open pull requests. The 25 newest issues were labelled triaged with a priority within a day of opening. Unsolicited pull requests are closed automatically and a monthly workflow closes stale issues (15). Not an MCP server and no official SDK (0). Cargo.lock, Dependabot and CI on three systems, run results unread (8). 20 + 20 + 15 + 0 + 8 = 63.

## Score by category

| Category | Weight | Emdash | herdr | Edge |
| --- | --- | --- | --- | --- |
| Reliability | 16% | 55 | 65 | herdr +10 |
| Performance | 10%, pending | pending | pending | not scored in this run |
| Schema & documentation | 13% | 55 | 91 | herdr +36 |
| Agent ergonomics | 13% | 55 | 73 | herdr +18 |
| Security & auth | 14% | 38 | 49 | herdr +11 |
| Payments & pricing | 10% | 90 | 90 | even |
| Task success | 10%, pending | pending | pending | not scored in this run |
| Maintenance & community | 7% | 70 | 63 | Emdash +7 |
| Transparency & trust | 7% | 54 | 70 | herdr +16 |
| Negative events | ≤15 | 0 | 0 | |
| **Total** | | **57.6 · C** | **71.1 · BB** | |

## Facts side by side

| Fact | Emdash | herdr |
| --- | --- | --- |
| Kind | Agent harness | Agent harness |
| Vendor | General Action, Inc. | herdr |
| Hosted endpoint | no (local only) | no (local only) |
| Transports |  |  |
| Auth | None | None |
| Pricing | Free | Free |
| x402 | no | no |
| Licence | Apache-2.0 | Apache-2.0 |
| Read-only variant documented | no | no |
| llms.txt | no | yes |
| Last release | 2026-11-06 | 2026-10-14 |
| Terms last updated | no document linked | no document linked |
| Privacy policy last updated | no document linked | 2026-11-02 |
| Popularity | none | 52k stars |

## How the scores have moved

### Emdash

- +3.7 on 13 November 2026 (D to C): checklist

### herdr

- +4.2 on 18 November 2026 (B to BB): terms, new evidence

## Verdicts

**Emdash.** A mature open-source app for parallel coding agents in Git worktrees, with issue intake from a dozen trackers and remote machines over SSH. Telemetry is on unless you turn it off, and no test workflow was found in the repository.

**herdr.** Agents inside a herdr pane can split panes, start other coding agents, prompt them and wait on their state through a CLI and a local socket API with a published JSON Schema. It is pre-1.0 local software with no sandbox, and any process in a pane can type into another agent's terminal.

## Before you call either

### Emdash

1. Launch with TELEMETRY_ENABLED=false if you don't want telemetry
2. Use the SSH mode to keep agents on a remote machine

### herdr

1. Check `HERDR_ENV=1` before any herdr command. If it isn't set, tell the person you aren't inside herdr and stop
2. Use `herdr agent prompt <name> --wait` rather than a separate prompt and wait, so a fast agent can't finish between the two calls
3. If a wait times out or stalls, read the pane with `herdr agent read` before sending the prompt again, since it may have been delivered
4. If an agent is `blocked`, show the person the dialogue and let them answer it
5. Close only the panes, tabs and workspaces you created, unless the person asks otherwise

## Questions

### Which is better for AI agents, Emdash or herdr?

herdr scores 71.1 (BB) on agent readiness against Emdash's 57.6 (C), and leads in 5 of 7 scored categories. Emdash leads on maintenance & community.

### Are Emdash and herdr open source?

Yes. Emdash is open source (Apache-2.0). herdr is open source (Apache-2.0).


## For agents

- This comparison as JSON: https://www.anchorterminal.com/compare/emdash-vs-herdr.json, and with the fewest tokens: https://www.anchorterminal.com/compare/emdash-vs-herdr.min.md
- Over MCP at https://www.anchorterminal.com/mcp (no key): `compare_tools {"a": "emdash", "b": "herdr"}`. From a terminal: `anchor compare emdash herdr`
- Each listing in full: https://www.anchorterminal.com/api/v1/tools/emdash.json and https://www.anchorterminal.com/api/v1/tools/herdr.json

## Other comparisons with Emdash or herdr

- [Agent Zero vs Emdash](https://www.anchorterminal.com/compare/agent-zero-vs-emdash.md)
- [Aider vs Emdash](https://www.anchorterminal.com/compare/aider-vs-emdash.md)
- [Amp vs Emdash](https://www.anchorterminal.com/compare/amp-vs-emdash.md)
- [Antigravity CLI vs Emdash](https://www.anchorterminal.com/compare/antigravity-cli-vs-emdash.md)
- [Auggie CLI vs Emdash](https://www.anchorterminal.com/compare/auggie-vs-emdash.md)
- [AXLR vs Emdash](https://www.anchorterminal.com/compare/axlr-vs-emdash.md)
- [boxes.dev vs Emdash](https://www.anchorterminal.com/compare/boxes-dev-vs-emdash.md)
- [Claude Code vs Emdash](https://www.anchorterminal.com/compare/claude-code-vs-emdash.md)
- [Click vs Emdash](https://www.anchorterminal.com/compare/click-agents-vs-emdash.md)
- [Cline vs Emdash](https://www.anchorterminal.com/compare/cline-vs-emdash.md)
- [Conductor vs Emdash](https://www.anchorterminal.com/compare/conductor-vs-emdash.md)
- [Crush vs Emdash](https://www.anchorterminal.com/compare/crush-vs-emdash.md)
- [Cursor CLI vs Emdash](https://www.anchorterminal.com/compare/cursor-cli-vs-emdash.md)
- [DeepSeek Harness (dsh) vs Emdash](https://www.anchorterminal.com/compare/deepseek-harness-vs-emdash.md)
- [dsh-superagent (DeepSeek) vs Emdash](https://www.anchorterminal.com/compare/deepseek-superagent-vs-emdash.md)
- [Devin vs Emdash](https://www.anchorterminal.com/compare/devin-vs-emdash.md)
- [Droid CLI vs Emdash](https://www.anchorterminal.com/compare/droid-cli-vs-emdash.md)
- [Pi vs Emdash](https://www.anchorterminal.com/compare/earendil-pi-vs-emdash.md)
- [Emdash vs Friday](https://www.anchorterminal.com/compare/emdash-vs-friday-work.md)
- [Emdash vs Gemini CLI](https://www.anchorterminal.com/compare/emdash-vs-gemini-cli.md)
- [Emdash vs GitHub Copilot CLI](https://www.anchorterminal.com/compare/emdash-vs-github-copilot-cli.md)
- [Emdash vs goose](https://www.anchorterminal.com/compare/emdash-vs-goose.md)
- [Emdash vs Harness²](https://www.anchorterminal.com/compare/emdash-vs-harness2.md)
- [Emdash vs HarnessRouter](https://www.anchorterminal.com/compare/emdash-vs-harnessrouter.md)
- [Emdash vs Jules](https://www.anchorterminal.com/compare/emdash-vs-jules.md)
- [Emdash vs Junie CLI](https://www.anchorterminal.com/compare/emdash-vs-junie.md)
- [Emdash vs Kilo Code CLI](https://www.anchorterminal.com/compare/emdash-vs-kilo-code-cli.md)
- [Emdash vs Kimi Code CLI](https://www.anchorterminal.com/compare/emdash-vs-kimi-code-cli.md)
- [Emdash vs Kiro CLI](https://www.anchorterminal.com/compare/emdash-vs-kiro-cli.md)
- [Emdash vs Letta](https://www.anchorterminal.com/compare/emdash-vs-letta.md)
- [Emdash vs mini-swe-agent](https://www.anchorterminal.com/compare/emdash-vs-mini-swe-agent.md)
- [Emdash vs MiniMax Code](https://www.anchorterminal.com/compare/emdash-vs-minimax-code.md)
- [Emdash vs Mistral Vibe CLI](https://www.anchorterminal.com/compare/emdash-vs-mistral-vibe-cli.md)
- [Emdash vs Muse Code](https://www.anchorterminal.com/compare/emdash-vs-muse-code.md)
- [Emdash vs OpenAI Agents API](https://www.anchorterminal.com/compare/emdash-vs-openai-agents-api.md)
- [Emdash vs OpenAI Codex](https://www.anchorterminal.com/compare/emdash-vs-openai-codex.md)
- [Emdash vs OpenCode](https://www.anchorterminal.com/compare/emdash-vs-opencode.md)
- [Emdash vs OpenHands](https://www.anchorterminal.com/compare/emdash-vs-openhands.md)
- [Emdash vs OpenMausBot](https://www.anchorterminal.com/compare/emdash-vs-openmausbot.md)
- [Emdash vs Orca](https://www.anchorterminal.com/compare/emdash-vs-orca.md)
- [Emdash vs Paseo](https://www.anchorterminal.com/compare/emdash-vs-paseo.md)
- [Emdash vs Prime Agent](https://www.anchorterminal.com/compare/emdash-vs-prime-agent.md)
- [Emdash vs Qoder CLI](https://www.anchorterminal.com/compare/emdash-vs-qoder-cli.md)
- [Emdash vs Qwen Code](https://www.anchorterminal.com/compare/emdash-vs-qwen-code.md)
- [Emdash vs Mirror CLI](https://www.anchorterminal.com/compare/emdash-vs-reflection-mirror.md)
- [Emdash vs Rovo Dev CLI](https://www.anchorterminal.com/compare/emdash-vs-rovo-dev-cli.md)
- [Emdash vs Sculptor](https://www.anchorterminal.com/compare/emdash-vs-sculptor.md)
- [Emdash vs T3 Code](https://www.anchorterminal.com/compare/emdash-vs-t3-code.md)
- [Emdash vs Traycer](https://www.anchorterminal.com/compare/emdash-vs-traycer.md)
- [Emdash vs Unstoppable](https://www.anchorterminal.com/compare/emdash-vs-unstoppable.md)
- [Emdash vs Verdent](https://www.anchorterminal.com/compare/emdash-vs-verdent.md)
- [Emdash vs Vibe-Trading](https://www.anchorterminal.com/compare/emdash-vs-vibe-trading.md)
- [Emdash vs Warp (Warp Agent CLI and the Oz Agent API)](https://www.anchorterminal.com/compare/emdash-vs-warp.md)
- [Agent Relay vs Emdash](https://www.anchorterminal.com/compare/agent-relay-vs-emdash.md)
- [Agent Relay vs herdr](https://www.anchorterminal.com/compare/agent-relay-vs-herdr.md)
- [Amp vs herdr](https://www.anchorterminal.com/compare/amp-vs-herdr.md)
- [Antigravity CLI vs herdr](https://www.anchorterminal.com/compare/antigravity-cli-vs-herdr.md)
- [Auggie CLI vs herdr](https://www.anchorterminal.com/compare/auggie-vs-herdr.md)
- [AXLR vs herdr](https://www.anchorterminal.com/compare/axlr-vs-herdr.md)
- [boxes.dev vs herdr](https://www.anchorterminal.com/compare/boxes-dev-vs-herdr.md)
- [Claude Code vs herdr](https://www.anchorterminal.com/compare/claude-code-vs-herdr.md)
- [Clawboo vs Emdash](https://www.anchorterminal.com/compare/clawboo-vs-emdash.md)
- [Clawboo vs herdr](https://www.anchorterminal.com/compare/clawboo-vs-herdr.md)
- [CLI Manager vs Emdash](https://www.anchorterminal.com/compare/cli-manager-vs-emdash.md)
- [CLI Manager vs herdr](https://www.anchorterminal.com/compare/cli-manager-vs-herdr.md)
- [Cline vs herdr](https://www.anchorterminal.com/compare/cline-vs-herdr.md)
- [Conductor vs herdr](https://www.anchorterminal.com/compare/conductor-vs-herdr.md)
- [Crush vs herdr](https://www.anchorterminal.com/compare/crush-vs-herdr.md)
- [DeepSeek Harness (dsh) vs herdr](https://www.anchorterminal.com/compare/deepseek-harness-vs-herdr.md)
- [dsh-superagent (DeepSeek) vs herdr](https://www.anchorterminal.com/compare/deepseek-superagent-vs-herdr.md)
- [Devin vs herdr](https://www.anchorterminal.com/compare/devin-vs-herdr.md)
- [Droid CLI vs herdr](https://www.anchorterminal.com/compare/droid-cli-vs-herdr.md)
- [Emdash vs Harness](https://www.anchorterminal.com/compare/emdash-vs-harness-autonomous.md)
- [Emdash vs Paperclip](https://www.anchorterminal.com/compare/emdash-vs-paperclip.md)
- [Emdash vs Parallax](https://www.anchorterminal.com/compare/emdash-vs-parallax-agents.md)
- [Friday vs herdr](https://www.anchorterminal.com/compare/friday-work-vs-herdr.md)
- [Gemini CLI vs herdr](https://www.anchorterminal.com/compare/gemini-cli-vs-herdr.md)
- [GitHub Copilot CLI vs herdr](https://www.anchorterminal.com/compare/github-copilot-cli-vs-herdr.md)
- [goose vs herdr](https://www.anchorterminal.com/compare/goose-vs-herdr.md)
- [Harness vs herdr](https://www.anchorterminal.com/compare/harness-autonomous-vs-herdr.md)
- [HarnessRouter vs herdr](https://www.anchorterminal.com/compare/harnessrouter-vs-herdr.md)
- [herdr vs Jules](https://www.anchorterminal.com/compare/herdr-vs-jules.md)
- [herdr vs Junie CLI](https://www.anchorterminal.com/compare/herdr-vs-junie.md)
- [herdr vs Kilo Code CLI](https://www.anchorterminal.com/compare/herdr-vs-kilo-code-cli.md)
- [herdr vs Kimi Code CLI](https://www.anchorterminal.com/compare/herdr-vs-kimi-code-cli.md)
- [herdr vs Kiro CLI](https://www.anchorterminal.com/compare/herdr-vs-kiro-cli.md)
- [herdr vs Letta](https://www.anchorterminal.com/compare/herdr-vs-letta.md)
- [herdr vs MiniMax Code](https://www.anchorterminal.com/compare/herdr-vs-minimax-code.md)
- [herdr vs Mistral Vibe CLI](https://www.anchorterminal.com/compare/herdr-vs-mistral-vibe-cli.md)
- [herdr vs Muse Code](https://www.anchorterminal.com/compare/herdr-vs-muse-code.md)
- [herdr vs OpenCode](https://www.anchorterminal.com/compare/herdr-vs-opencode.md)
- [herdr vs OpenHands](https://www.anchorterminal.com/compare/herdr-vs-openhands.md)
- [herdr vs OpenMausBot](https://www.anchorterminal.com/compare/herdr-vs-openmausbot.md)
- [herdr vs Orca](https://www.anchorterminal.com/compare/herdr-vs-orca.md)
- [herdr vs Paperclip](https://www.anchorterminal.com/compare/herdr-vs-paperclip.md)
- [herdr vs Parallax](https://www.anchorterminal.com/compare/herdr-vs-parallax-agents.md)
- [herdr vs Paseo](https://www.anchorterminal.com/compare/herdr-vs-paseo.md)
- [herdr vs Prime Agent](https://www.anchorterminal.com/compare/herdr-vs-prime-agent.md)
- [herdr vs Qoder CLI](https://www.anchorterminal.com/compare/herdr-vs-qoder-cli.md)
- [herdr vs Qwen Code](https://www.anchorterminal.com/compare/herdr-vs-qwen-code.md)
- [herdr vs Mirror CLI](https://www.anchorterminal.com/compare/herdr-vs-reflection-mirror.md)
- [herdr vs Rovo Dev CLI](https://www.anchorterminal.com/compare/herdr-vs-rovo-dev-cli.md)
- [herdr vs Sculptor](https://www.anchorterminal.com/compare/herdr-vs-sculptor.md)
- [herdr vs T3 Code](https://www.anchorterminal.com/compare/herdr-vs-t3-code.md)
- [herdr vs Traycer](https://www.anchorterminal.com/compare/herdr-vs-traycer.md)
- [herdr vs Unstoppable](https://www.anchorterminal.com/compare/herdr-vs-unstoppable.md)
- [herdr vs Verdent](https://www.anchorterminal.com/compare/herdr-vs-verdent.md)
- [herdr vs Vibe-Trading](https://www.anchorterminal.com/compare/herdr-vs-vibe-trading.md)
- [herdr vs Warp (Warp Agent CLI and the Oz Agent API)](https://www.anchorterminal.com/compare/herdr-vs-warp.md)

---

Query this catalogue directly over MCP: https://www.anchorterminal.com/mcp (Streamable HTTP, no key). How: https://www.anchorterminal.com/agents/#mcp
