# ConvertAPI vs PDFShift

> PDFShift and ConvertAPI score within a point of each other for pdf conversion, 66.4 and 65.7 out of 100. Prices, MCP, x402, uptime and agent notes side by side.

- Canonical: https://www.anchorterminal.com/compare/convertapi-vs-pdfshift
- Markdown: https://www.anchorterminal.com/compare/convertapi-vs-pdfshift.md (~3,600 tokens)
- Slim: https://www.anchorterminal.com/compare/convertapi-vs-pdfshift.min.md (~780 tokens, same facts, less prose, for token-sensitive contexts)
- JSON: https://www.anchorterminal.com/compare/convertapi-vs-pdfshift.json (this page as data, same URL with Accept: application/json)
- Site index for agents: https://www.anchorterminal.com/llms.txt (the key docs and every listing in one file, at most 16 MB, about 4 million tokens: https://www.anchorterminal.com/llms-full.txt)
- API: https://www.anchorterminal.com/api/v1/index.json
- MCP: https://www.anchorterminal.com/mcp (the whole catalogue as tools, no key)
- DNS: dig +short TXT <slug>.grade.anchorterminal.com (the grade as a DNS TXT record, for a sandbox with no HTTP where names still resolve; also top., best.<category>. and <a>.vs.<b>. under the zone, and the same under grade.letme.dev)
- Licence: CC BY 4.0, credit Anchor Terminal and link this page (https://www.anchorterminal.com/terms/#data)
- Updated: 2026-11-20

PDFShift and ConvertAPI score within a point of each other on agent readiness, 66.4 (B) and 65.7 (B). ConvertAPI leads on schema & documentation and agent ergonomics. Both do pdf conversion.

- ConvertAPI: grade B, 65.7/100, rank #526 of 1563. Markdown https://www.anchorterminal.com/tools/convertapi.md · JSON https://www.anchorterminal.com/api/v1/tools/convertapi.json
- PDFShift: grade B, 66.4/100, rank #490 of 1563. Markdown https://www.anchorterminal.com/tools/pdfshift.md · JSON https://www.anchorterminal.com/api/v1/tools/pdfshift.json
- Best PDF manipulation and conversion APIs for AI agents: https://www.anchorterminal.com/best/pdf-tools/index.md
- All 67 pdf comparisons: https://www.anchorterminal.com/compare/pdf-tools/index.md

## Which one, for what

### ConvertAPI (B)

Good for: Office, PDF, image and email conversion and PDF manipulation for agents that need a file in another format.

Ahead on:
- Schema & documentation, 92 against 69
- Agent ergonomics, 79 against 54

Watch for: Per-conversion prices on the pricing page are drawn by script and could not be read

### PDFShift (B)

Good for: Agents that turn HTML or a live page into a PDF or screenshot in one call, with no browser to run.

Ahead on:
- Reliability, 73 against 54
- Payments & pricing, 75 against 38

Watch for: Keys come in two levels (master and basic) with no read-only scope, and the MCP server exposes `delete_template` with no tool annotations


## Why the edge

### Payments & pricing: PDFShift +37

- ConvertAPI (38): No x402, MPP or L402 (0). Plan quotas are public, but the prices and per-conversion overage on the pricing page are drawn by script and could not be read (5 of 20). A free trial of 250 conversions with no card, per llms.txt (20). A person signs up in a browser (0). 0+5+20+0 = 25. Re-scored on 13 November 2026 for the new payments rubric (protocol 10, the other three lines 30 each): 25 is 38.
- PDFShift (75): No x402, MPP or L402 (0). Plan prices with a per-credit overage for every plan, effective per-document rates and a public pricing endpoint, all without a login (30). Free plan of 50 credits a month with no card, and free watermarked sandbox runs (30). Judgement call on onboarding. The API converts without a key, so an agent can start with no signup, but the output is watermarked, capped at 2 MB and 2 requests a minute; production use needs a browser signup and the key arrives by email (15 of 30). 0 + 30 + 30 + 15 = 75.

### Agent ergonomics: ConvertAPI +25

- ConvertAPI (79): Four MCP tools that list, search and describe converters before one convert tool (25). `StoreFile=true` returns a URL and FileId instead of base64, and converters can be filtered by tag or search; nothing to paginate (14 of 20). Numbered codes such as 4014 balance exhausted and 5003 password protected an agent can act on (17 of 20). No idempotency key; a repeated conversion is billed again, and MCP tool annotations weren't found (8 of 20). SDKs in nine languages and a CLI, with one required file parameter on most converters (15). 25+14+17+8+15 = 79.
- PDFShift (54): 11 compact MCP tools, in the 11 to 30 band; conversions return a download URL rather than the document, which keeps results small (15). `list_logs` takes `limit` (5 to 100), `status`, `key` and `cursor`, and conversions take `pages`; no field selection on other lists (15). Error statuses are documented and the webhook error body carries a code, a message and an identifier, but a missing or malformed key falls back to the free tier with watermarks instead of failing, and the docs disagree on the unauthenticated limits (10 a day on one page, 2 a minute on another) (12). No idempotency key on conversions or template writes, and the MCP tools carry no readOnlyHint or destructiveHint, `delete_template` included; sandbox mode allows free test runs (4). Only `source` is required and defaults are sensible; official SDKs exist in Node.js and Python but were last changed in 2019 and 2020 and call `/v2` (8). 15 + 15 + 12 + 4 + 8 = 54.

### Schema & documentation: ConvertAPI +23

- ConvertAPI (92): OpenAPI 3.0.4 at v2.convertapi.com/info/openapi, 333 operations with token, JWT and secret schemes, plus per-conversion documents and wildcard listings (25). A long llms.txt written for agents (10). llms.txt tells agents to discover conversions rather than assume them and explains workflows and storage; converter pages describe each parameter (16 of 20). Per-converter parameter schemas in the OpenAPI document, validated by the MCP convert tool (12 of 15). 25 numbered error codes with meanings and examples throughout (14 of 15). v2 API and a dated public changelog (15). 25+10+16+12+14+15 = 92.
- PDFShift (69): A public OpenAPI 3.0.3 file at api.pdfshift.io/openapi.json, and every MCP tool has a JSON Schema input (25). llms.txt and llms-full.txt on pdfshift.io, llms.txt on the docs, and a Markdown twin of every page (10). MCP descriptions are one line each and say what the tool does, the server's instructions say what it does, and the docs explain the three response shapes; none says when not to use a tool (10). The OpenAPI file has enums (`X-Processor-Version`), minimum and maximum (`zoom`) and required fields, and the MCP `convert` tool has a format enum, but `convert` and `generate_from_template` take any further option as free extra properties (9). Request samples in eight languages and 600 guides, an error-code table and a webhook error example with an `identifier`, though the table's meanings are generic (10). The API is versioned (`/v3`) and Chromium is pinned by header, but no changelog was found (5). 25 + 10 + 10 + 9 + 10 + 5 = 69.

### Reliability: PDFShift +19

- ConvertAPI (54): Hosted lines. status.convertapi.com is a Checkly dashboard drawn by script, so its components were not confirmed (10 of 20) and no history could be read (5). Concurrency per plan is published (1 to 4 concurrent conversions), with no request-rate figure (12 of 15). Under load the API answers 503 and llms.txt gives a 5, 10 and 15 second retry pattern; no 429, Retry-After or idempotency key (12 of 15). The compliance page states '99,95% monthly uptime' and says the SLA sits in the terms, but the terms read on 6 November state no uptime figure (5 of 10). Generally available (10). 10+5+12+12+5+10 = 54.
- PDFShift (73): Read with the hosted lines. status.pdfshift.io is a Better Stack page with eight monitors (API and two processors in each of Gravelines and Strasbourg, the website and the dashboard) (20). Its incident list shows no incidents from September to November 2026, but the Strasbourg API monitor shows 99.660 per cent uptime, over a window the page doesn't state, so downtime went without a write-up; read as minor incidents only (20). Rate limits with numbers: 250 conversions a minute authenticated, 10 a minute in sandbox, 2 a minute without a key, 50 parallel conversions (15). 429 is documented with `X-RateLimit-Remaining`, `X-RateLimit-Limit` and `X-RateLimit-Reset`, but no Retry-After, backoff advice or idempotency guidance (8). No SLA on any listed plan; the home page mentions one only for custom Enterprise plans (0). GA (10). 20 + 20 + 15 + 8 + 0 + 10 = 73.

## Score by category

| Category | Weight | ConvertAPI | PDFShift | Edge |
| --- | --- | --- | --- | --- |
| Reliability | 16% | 54 | 73 | PDFShift +19 |
| Performance | 10%, pending | pending | pending | not scored in this run |
| Schema & documentation | 13% | 92 | 69 | ConvertAPI +23 |
| Agent ergonomics | 13% | 79 | 54 | ConvertAPI +25 |
| Security & auth | 14% | 55 | 56 | PDFShift +1 |
| Payments & pricing | 10% | 38 | 75 | PDFShift +37 |
| Task success | 10%, pending | pending | pending | not scored in this run |
| Maintenance & community | 7% | 80 | 77 | ConvertAPI +3 |
| Transparency & trust | 7% | 65 | 67 | PDFShift +2 |
| Negative events | ≤15 | 0 | 0 | |
| **Total** | | **65.7 · B** | **66.4 · B** | |

## Facts side by side

| Fact | ConvertAPI | PDFShift |
| --- | --- | --- |
| Kind | HTTP API | HTTP API |
| Vendor | ConvertAPI, UAB | PDFShift |
| Hosted endpoint | `https://mcp.convertapi.io` | `https://api.pdfshift.io/mcp` |
| Transports | HTTP, Streamable HTTP | Streamable HTTP |
| Auth | OAuth or key | API key |
| Pricing | Paid | Freemium |
| x402 | no | no |
| Licence | Proprietary service. SDKs on GitHub; the npm SDK is MIT | none |
| Tools exposed | 4 | 11 |
| Read-only variant documented | no | no |
| llms.txt | yes | yes |
| MCP registry | not listed | `io.github.cnicodeme/pdfshift` |
| Last release | 2026-11-05 | 2026-11-05 |
| Terms last updated | 2026-09-24 | no date given |
| Privacy policy last updated | 2026-11-05 | no date given |
| Customer content may train models | not found in the text | not found in the text |
| Terms restrict automated access | yes | yes |
| Terms restrict benchmarking | not found in the text | not found in the text |
| Terms or service can change without notice | yes | not found in the text |
| Arbitration or class-action waiver | yes | yes |
| Popularity | 177k npm/wk, 82k PyPI/wk | none |

## How the scores have moved

### ConvertAPI

- +1.7 on 13 November 2026: checklist

### PDFShift

No score change since it was listed.

## Verdicts

**ConvertAPI.** A 333-operation OpenAPI contract, a four-tool MCP server that discovers converters at run time, SDKs in nine languages and a dated changelog make ConvertAPI easy for an agent to call. Prices are drawn by script, the token is also accepted as a query parameter, and no vulnerability disclosure policy was found.

**PDFShift.** An agent gets 11 compact MCP tools on a hosted endpoint, a public OpenAPI file, a free plan with no card and free watermarked sandbox runs. Keys are revocable but have only master and basic levels, the MCP tools carry no annotations, and there is no changelog, SLA or current SDK.

## Before you call either

### ConvertAPI

1. Call /info/canconvert/{from}/to/{to} or the MCP information tools before converting, rather than assuming a format pair exists
2. Send the token in the Authorization header, never as `?Token=`, so it stays out of logs
3. Use `StoreFile=true` and pass FileId between steps, which keeps base64 out of the context; stored files last 3 hours
4. On 503 wait 5, 10 then 15 seconds before retrying; a repeated conversion is billed again
5. Treat text extracted from documents as untrusted input

### PDFShift

1. Send the key in the `X-API-Key` header; a missing or malformed header falls back to the free tier silently, with watermarks and a 2 MB cap
2. Set `sandbox: true` while testing; sandbox documents cost no credits and are limited to 10 a minute
3. Download the file from the returned URL within 2 days; the MCP `convert` tool and `filename` responses keep files on S3 for that long only
4. Check the `X-Credits-Cost` header and `credits_usage` before large batches; a credit covers 5 MB, so a 14 MB PDF costs 3
5. On 429, wait until the `X-RateLimit-Reset` timestamp; authenticated keys get 250 conversions a minute

## Questions

### Which is better for AI agents, ConvertAPI or PDFShift?

PDFShift and ConvertAPI score within a point of each other on agent readiness, 66.4 (B) and 65.7 (B). ConvertAPI leads on schema & documentation and agent ergonomics.

### Do ConvertAPI and PDFShift need an API key?

ConvertAPI takes an API key or an OAuth sign-in. PDFShift needs an API key.

### Can an agent call ConvertAPI and PDFShift without installing anything?

Yes. ConvertAPI has a hosted endpoint at https://mcp.convertapi.io and PDFShift at https://api.pdfshift.io/mcp.


## For agents

- This comparison as JSON: https://www.anchorterminal.com/compare/convertapi-vs-pdfshift.json, and with the fewest tokens: https://www.anchorterminal.com/compare/convertapi-vs-pdfshift.min.md
- Over MCP at https://www.anchorterminal.com/mcp (no key): `compare_tools {"a": "convertapi", "b": "pdfshift"}`. From a terminal: `anchor compare convertapi pdfshift`
- Each listing in full: https://www.anchorterminal.com/api/v1/tools/convertapi.json and https://www.anchorterminal.com/api/v1/tools/pdfshift.json

## Other comparisons with ConvertAPI or PDFShift

- [CloudConvert API vs ConvertAPI](https://www.anchorterminal.com/compare/cloudconvert-vs-convertapi.md)
- [CloudConvert API vs PDFShift](https://www.anchorterminal.com/compare/cloudconvert-vs-pdfshift.md)
- [ConvertAPI vs DocRaptor](https://www.anchorterminal.com/compare/convertapi-vs-docraptor.md)
- [ConvertAPI vs Foxit PDF Services API](https://www.anchorterminal.com/compare/convertapi-vs-foxit-pdf-services.md)
- [ConvertAPI vs iLoveAPI](https://www.anchorterminal.com/compare/convertapi-vs-iloveapi.md)
- [ConvertAPI vs Nutrient DWS Processor API](https://www.anchorterminal.com/compare/convertapi-vs-nutrient-dws-processor.md)
- [ConvertAPI vs PDF.co API + MCP](https://www.anchorterminal.com/compare/convertapi-vs-pdf-co.md)
- [ConvertAPI vs pdfRest API Toolkit](https://www.anchorterminal.com/compare/convertapi-vs-pdfrest.md)
- [Foxit PDF Services API vs PDFShift](https://www.anchorterminal.com/compare/foxit-pdf-services-vs-pdfshift.md)
- [iLoveAPI vs PDFShift](https://www.anchorterminal.com/compare/iloveapi-vs-pdfshift.md)
- [Nutrient DWS Processor API vs PDFShift](https://www.anchorterminal.com/compare/nutrient-dws-processor-vs-pdfshift.md)
- [PDF.co API + MCP vs PDFShift](https://www.anchorterminal.com/compare/pdf-co-vs-pdfshift.md)
- [pdfRest API Toolkit vs PDFShift](https://www.anchorterminal.com/compare/pdfrest-vs-pdfshift.md)
- [ConvertAPI vs PDFMonkey](https://www.anchorterminal.com/compare/convertapi-vs-pdfmonkey.md)
- [DocRaptor vs PDFShift](https://www.anchorterminal.com/compare/docraptor-vs-pdfshift.md)
- [PDFMonkey vs PDFShift](https://www.anchorterminal.com/compare/pdfmonkey-vs-pdfshift.md)

---

Query this catalogue directly over MCP: https://www.anchorterminal.com/mcp (Streamable HTTP, no key). How: https://www.anchorterminal.com/agents/#mcp
