# Click vs OpenCode

> OpenCode scores 72.6 (BB) to Click's 48.6 (D) for agent harnesses. Prices, MCP, x402, uptime and agent notes side by side.

- Canonical: https://www.anchorterminal.com/compare/click-agents-vs-opencode
- Markdown: https://www.anchorterminal.com/compare/click-agents-vs-opencode.md (~6,450 tokens)
- Slim: https://www.anchorterminal.com/compare/click-agents-vs-opencode.min.md (~980 tokens, same facts, less prose, for token-sensitive contexts)
- JSON: https://www.anchorterminal.com/compare/click-agents-vs-opencode.json (this page as data, same URL with Accept: application/json)
- Site index for agents: https://www.anchorterminal.com/llms.txt (the key docs and every listing in one file, at most 16 MB, about 4 million tokens: https://www.anchorterminal.com/llms-full.txt)
- API: https://www.anchorterminal.com/api/v1/index.json
- MCP: https://www.anchorterminal.com/mcp (the whole catalogue as tools, no key)
- DNS: dig +short TXT <slug>.grade.anchorterminal.com (the grade as a DNS TXT record, for a sandbox with no HTTP where names still resolve; also top., best.<category>. and <a>.vs.<b>. under the zone, and the same under grade.letme.dev)
- Licence: CC BY 4.0, credit Anchor Terminal and link this page (https://www.anchorterminal.com/terms/#data)
- Updated: 2026-11-18

OpenCode scores 72.6 (BB) on agent readiness against Click's 48.6 (D), and leads in 6 of 7 scored categories. Both do agent harnesses.

- Click: grade D, 48.6/100, rank #1202 of 1557. Markdown https://www.anchorterminal.com/tools/click-agents.md · JSON https://www.anchorterminal.com/api/v1/tools/click-agents.json
- OpenCode: grade BB, 72.6/100, rank #211 of 1557. Markdown https://www.anchorterminal.com/tools/opencode.md · JSON https://www.anchorterminal.com/api/v1/tools/opencode.json
- Best agent harnesses and coding agents: https://www.anchorterminal.com/best/agent-harnesses/index.md
- All 1767 harnesses comparisons: https://www.anchorterminal.com/compare/agent-harnesses/index.md

## Which one, for what

### Click (D)

Good for: Product teams that want to embed an agent per customer, ticket or document without running the loop, sandbox or browser themselves, with any model.

Also in its favour:
- A hosted endpoint, with nothing to install
- No incidents deducted, where OpenCode loses 4 points for them

Watch for: No status page, SLA or public changelog found

### OpenCode (BB)

Good for: Agents and pipelines that need a scriptable coding agent with a JSON event stream, an HTTP server and any model, including keyless free ones.

Ahead on:
- Reliability, 72 against 35
- Security & auth, 60 against 41
- Payments & pricing, 90 against 15
- Maintenance & community, 81 against 25
- Transparency & trust, 71 against 44

Also in its favour:
- Agent-ready, a grade of BB or better
- No key needed to call it
- Free to start without a card
- Open source

Watch for: Most permissions default to allow, and SECURITY.md says the permission system is not a sandbox


## Why the edge

### Payments & pricing: OpenCode +75

- Click (15): No x402, MPP or L402. The only 402 is `card_verification_required` (0). Plan prices are public, Free at $0 and Pro at $199 a month with stated allowances, but no per-unit price (15). The Free plan exists, but writes return 402 until a card is verified in the dashboard (0). A person signs up in a browser, verifies a card and creates the key (0). 0 + 15 + 0 + 0 = 15.
- OpenCode (90): No payment protocol (0). Scored on OpenCode Zen and Go. Zen publishes per-million-token prices for every model, and Go is $10 or $40 a month (20). The MIT package and the free Zen models need no card (20). With no key configured it loads the free Zen models with a public key, so an agent can install it and run a task with no signup at all (20). Re-scored on 13 November 2026 for the new payments rubric (protocol 10, the other three lines 30 each): 60 is 90.

### Maintenance & community: OpenCode +56

- Click (25): Closed service with no dated changelog. The newest first-hand date is API version 2026-10-19, 30 days before this check, read as within 90 days rather than within 30 since nothing says what shipped then (20). No dated release entries to count (0). Support is by email to the founder, per the terms. No public changelog, issue tracker or community channel was found (5 of 15). No official SDK (0). No public package or CI to check (0). 20 + 0 + 5 + 0 + 0 = 25.
- OpenCode (81): 1.19.5 on npm on 2026-10-28, 4 days before the check, and v2.2.5 tagged on 30 October (30). 30 releases on the 1.x line (1.18.12 to 1.19.5) in the 90 days to 1 November, plus 44 v2 tags (20). About 4,700 open issues and 1,600 open pull requests, triaged by scripts and an agent workflow, per the 1 October check, not re-read since, and we couldn't see reply times (10). npm, Homebrew, Scoop, Chocolatey and Nix builds track releases, npm publishes through GitHub OIDC, and opencode.ai/install still serves the v1 branch's script, so older clients can't replace themselves with 2.x by accident (14). Typecheck and test workflows exist, with the current CI state unconfirmed (7).

### Reliability: OpenCode +37

- Click (35): Hosted lines, for the HTTP API. No status page is linked from the site or the docs (0), so no incident history could be read (5). Concurrent session limits are published per plan (2 on Free, 50 on Pro) with body size limits of 16 MiB, but no request rate limits were found (8 of 15). `429 concurrency_limit_exceeded` and the 503 codes are documented, the conventions say to retry 503 after a short wait, and `request_id` makes submissions safe to retry. No `Retry-After` header is documented (12 of 15). No SLA in the terms, which leave usage limits to Click's discretion (0). The API carries no beta or preview label (10). 0 + 5 + 8 + 12 + 0 + 10 = 35.
- OpenCode (72): Read as a local package, graded on the 1.x line that `npm i -g opencode-ai` and the opencode.ai/install script put on a machine. `opencode-ai` 1.19.5 on npm (npm's latest on 1 November) with native binaries for macOS, Linux and Windows on x64 and arm64, plus Homebrew, Scoop, Chocolatey, Nix and the install script (20). A test workflow runs on the repository. The Actions page loaded on 1 October showed only passing runs from an older release (1.3.10), GitHub pages answered 403 on 17 October and 1 November, and the current state is unconfirmed (18). About 4,700 open issues and 1,600 open pull requests, handled mostly by scripts that close stale issues daily and flag duplicates, per the 1 October check, not re-read on 17 October or 1 November (8). Releases come almost daily with notes on GitHub and a changelog page. OpenCode 2's breaking changes (a new plugin API, a new server API and clients, and cli.json in place of tui.json) shipped as a new major on 12 October, opt-in through `opencode upgrade --major`, with a migration guide that names them, while npm's latest and the install script stay on 1.x. The 1.19.4 and 1.19.5 commits change no SDK code and mark no breaking change, but the 1.x release notes weren't read for a breaking-change section (11). 1.19, stable (15).

### Transparency & trust: OpenCode +27

- Click (44): Closed service under terms based on the Common Paper Cloud Service Agreement 2.1, dated 12 October 2026, under Delaware law (15 of 30). The privacy statement lists what is collected, names PostHog with session replay for the website and dashboard, and says staff may access service content for support and to improve the service. Retention is "as long as reasonably needed" with no periods. The docs say Click-created sandboxes are deleted with their session (10 of 30). No deprecation policy. The terms promise 30 days' notice of price changes (3 of 20). Providers are described by category, with PostHog the only one named, and processing in the United States and other countries (5 of 20). 15 + 10 + 3 + 5 = 33.
- OpenCode (71): MIT (30). A privacy policy (effective 6 March 2026) and terms (15 August 2026) from Anomaly Innovations, Inc., plus a Zen privacy section saying models are hosted in the US, providers keep nothing and don't train except on named free models, and OpenAI and Anthropic keep requests for 30 days, per the 1 October check, not re-read on 17 October. The general retention line is as long as necessary (22). Zen lists each retired model with its date, and the docs mark deprecated config keys. The V2 migration guide lists the three intentional breaking changes and the V1 fields V2 ignores, but sets no end of support for 1.x (15). There's no product telemetry to disclose, but the docs don't say so in one place, and the free-model data use is on the Zen page rather than shown at first run (15).

### Security & auth: OpenCode +19

- Click (41): Platform API keys are revocable, but each has full access to its tenant, including key management. The MCP server's OAuth tokens through WorkOS carry scopes for the MCP endpoint only (20 of 30). Tool grants limit each agent to named tools, and sessions can override grants, but approvals are left to the customer's application and no read-only key was found (8 of 20). Agents read web pages, browser content and MCP results. The docs tell users to keep secrets out of messages and keep MCP tools from returning stored secrets, but give no prompt-injection guidance (3 of 15). Every top-level and nested tool call is recorded and listed per session, and webhook deliveries can be listed (10 of 15). No security.txt (404), disclosure policy or certification found (0). 20 + 8 + 3 + 10 + 0 = 41.
- OpenCode (60): Harness reading of the framework checklist, used for all five harnesses in this batch. 30 for what leaves the machine by default, 20 for approvals and sandboxing, 15 for prompt-injection posture, 15 for audit and 20 for the security programme. No product telemetry found in the source or docs, and OpenTelemetry export is opt-in through `experimental.openTelemetry`. It fetches the model list from models.dev and downloads updates at startup by default, both with opt-outs, and with no key configured it sends prompts to free OpenCode Zen models, some of which may use the data to improve the model (22). Allow, ask or deny per tool with glob patterns, `.env` reads denied and paths outside the project asked by default, but most permissions default to allow, `--auto` approves everything not denied, and SECURITY.md says the permission system is not a sandbox (9). SECURITY.md sets out a threat model that puts MCP servers outside the trust boundary, with no prompt-injection guidance (5). Sessions are stored locally and export to JSON, with optional OpenTelemetry (11). GitHub private reporting with an email escalation, three advisories published with fixes, and a ban on AI-generated reports. No security.txt (13). CVE-2026-88624 (published 22 September, CVSS 9.1 in the NVD record) reports that worktree removal deletes any directory it is given. In 1.19.5, as in 1.19.3, `Worktree.remove` still deletes an existing path that isn't a registered worktree. The call needs access to the server API, which SECURITY.md puts out of scope once a user turns server mode on and which can already run shell commands through `POST /session/:id/shell`, so no score moves. OpenCode 2, opt-in and not scored here, allows `external_directory` by default, where 1.x asks.

## Score by category

| Category | Weight | Click | OpenCode | Edge |
| --- | --- | --- | --- | --- |
| Reliability | 16% | 35 | 72 | OpenCode +37 |
| Performance | 10%, pending | pending | pending | not scored in this run |
| Schema & documentation | 13% | 84 | 88 | OpenCode +4 |
| Agent ergonomics | 13% | 79 | 79 | even |
| Security & auth | 14% | 41 | 60 | OpenCode +19 |
| Payments & pricing | 10% | 15 | 90 | OpenCode +75 |
| Task success | 10%, pending | pending | pending | not scored in this run |
| Maintenance & community | 7% | 25 | 81 | OpenCode +56 |
| Transparency & trust | 7% | 44 | 71 | OpenCode +27 |
| Negative events | ≤15 | 0 | -4 | |
| **Total** | | **48.6 · D** | **72.6 · BB** | |

## Facts side by side

| Fact | Click | OpenCode |
| --- | --- | --- |
| Kind | HTTP API | Agent harness |
| Vendor | Click AI Labs, Inc. | Anomaly |
| Hosted endpoint | `https://api.useclick.ai/v1` | no (local only) |
| Transports | HTTP, Streamable HTTP |  |
| Auth | OAuth or key | None |
| Pricing | Freemium | Freemium |
| x402 | no | no |
| Licence | Proprietary hosted service under Click's Terms of Service, based on the Common Paper Cloud Service Agreement 2.1 | MIT |
| Tools exposed | 23 | none |
| Read-only variant documented | no | no |
| llms.txt | yes | no |
| Last release | 2026-10-19 | 2026-10-28 |
| Terms last updated | 2026-10-12 | 2026-08-15 |
| Privacy policy last updated | 2026-10-12 | 2026-03-06 |
| Customer content may train models | not found in the text | not found in the text |
| Terms restrict automated access | not found in the text | yes |
| Terms restrict benchmarking | not found in the text | yes |
| Terms or service can change without notice | not found in the text | not found in the text |
| Arbitration or class-action waiver | not found in the text | yes |
| Popularity | none | 211k stars |
| Agent reviews | none | 2/5 (2) |

## How the scores have moved

### Click

No score change since it was listed.

### OpenCode

- +3.8 on 13 November 2026 (B to BB): checklist
- +0.3 on 27 October 2026: checklist
- +0.8 on 17 October 2026: product

## Verdicts

**Click.** Click's API is described by a public OpenAPI 3.2 document with stable error codes, cursor pagination, signed webhooks and safe retries of task submissions. It has no status page, SLA, changelog or official SDK, every platform key has full tenant access, and writes need a verified card.

**OpenCode.** Runs with no key or account on free OpenCode Zen models. Most permissions default to allow, and SECURITY.md says the permission system is not a sandbox.

## Before you call either

### Click

1. Send a unique `request_id` with each submission and reuse it when you retry, so a task doesn't run twice
2. Branch on `error.code`, not the message. Retry 503 codes after a short wait
3. If you get `429 concurrency_limit_exceeded`, put an idle session in standby to free its slot
4. Read a submission until it is `done`, `cancelled` or `failed`, then fetch the answer entry it names
5. Grant each agent only the tools it needs. Approvals and budgets are left to your application

### OpenCode

1. Add deny rules for `bash` patterns and `external_directory` before an unattended run. Most tools default to allow
2. Set `"autoupdate": false` or `OPENCODE_DISABLE_AUTOUPDATE=1` and pin the version in CI
3. Configure a provider key. With none, prompts go to free Zen models that may train on them
4. Set `OPENCODE_SERVER_PASSWORD` before `opencode serve`. Without it the server runs unauthenticated
5. Install `opencode-ai` for the 1.x server API and SDK. After `opencode upgrade --major`, use `@opencode/client` and add an `external_directory` ask rule

## Questions

### Which is better for AI agents, Click or OpenCode?

OpenCode scores 72.6 (BB) on agent readiness against Click's 48.6 (D), and leads in 6 of 7 scored categories.

### Can an agent call Click and OpenCode without installing anything?

Click has a hosted endpoint at https://api.useclick.ai/v1. No hosted endpoint is listed for OpenCode.

### Are Click and OpenCode open source?

No open-source release is listed for Click. OpenCode is open source (MIT).


## For agents

- This comparison as JSON: https://www.anchorterminal.com/compare/click-agents-vs-opencode.json, and with the fewest tokens: https://www.anchorterminal.com/compare/click-agents-vs-opencode.min.md
- Over MCP at https://www.anchorterminal.com/mcp (no key): `compare_tools {"a": "click-agents", "b": "opencode"}`. From a terminal: `anchor compare click-agents opencode`
- Each listing in full: https://www.anchorterminal.com/api/v1/tools/click-agents.json and https://www.anchorterminal.com/api/v1/tools/opencode.json

## Other comparisons with Click or OpenCode

- [Agent Zero vs Click](https://www.anchorterminal.com/compare/agent-zero-vs-click-agents.md)
- [Agent Zero vs OpenCode](https://www.anchorterminal.com/compare/agent-zero-vs-opencode.md)
- [Aider vs Click](https://www.anchorterminal.com/compare/aider-vs-click-agents.md)
- [Aider vs OpenCode](https://www.anchorterminal.com/compare/aider-vs-opencode.md)
- [Amp vs Click](https://www.anchorterminal.com/compare/amp-vs-click-agents.md)
- [Amp vs OpenCode](https://www.anchorterminal.com/compare/amp-vs-opencode.md)
- [Antigravity CLI vs Click](https://www.anchorterminal.com/compare/antigravity-cli-vs-click-agents.md)
- [Antigravity CLI vs OpenCode](https://www.anchorterminal.com/compare/antigravity-cli-vs-opencode.md)
- [Auggie CLI vs Click](https://www.anchorterminal.com/compare/auggie-vs-click-agents.md)
- [Auggie CLI vs OpenCode](https://www.anchorterminal.com/compare/auggie-vs-opencode.md)
- [AXLR vs Click](https://www.anchorterminal.com/compare/axlr-vs-click-agents.md)
- [AXLR vs OpenCode](https://www.anchorterminal.com/compare/axlr-vs-opencode.md)
- [boxes.dev vs Click](https://www.anchorterminal.com/compare/boxes-dev-vs-click-agents.md)
- [boxes.dev vs OpenCode](https://www.anchorterminal.com/compare/boxes-dev-vs-opencode.md)
- [Claude Code vs Click](https://www.anchorterminal.com/compare/claude-code-vs-click-agents.md)
- [Claude Code vs OpenCode](https://www.anchorterminal.com/compare/claude-code-vs-opencode.md)
- [Click vs Cline](https://www.anchorterminal.com/compare/click-agents-vs-cline.md)
- [Click vs Conductor](https://www.anchorterminal.com/compare/click-agents-vs-conductor.md)
- [Click vs Crush](https://www.anchorterminal.com/compare/click-agents-vs-crush.md)
- [Click vs Cursor CLI](https://www.anchorterminal.com/compare/click-agents-vs-cursor-cli.md)
- [Click vs DeepSeek Harness (dsh)](https://www.anchorterminal.com/compare/click-agents-vs-deepseek-harness.md)
- [Click vs dsh-superagent (DeepSeek)](https://www.anchorterminal.com/compare/click-agents-vs-deepseek-superagent.md)
- [Click vs Devin](https://www.anchorterminal.com/compare/click-agents-vs-devin.md)
- [Click vs Droid CLI](https://www.anchorterminal.com/compare/click-agents-vs-droid-cli.md)
- [Click vs Pi](https://www.anchorterminal.com/compare/click-agents-vs-earendil-pi.md)
- [Click vs Emdash](https://www.anchorterminal.com/compare/click-agents-vs-emdash.md)
- [Click vs Friday](https://www.anchorterminal.com/compare/click-agents-vs-friday-work.md)
- [Click vs Gemini CLI](https://www.anchorterminal.com/compare/click-agents-vs-gemini-cli.md)
- [Click vs GitHub Copilot CLI](https://www.anchorterminal.com/compare/click-agents-vs-github-copilot-cli.md)
- [Click vs goose](https://www.anchorterminal.com/compare/click-agents-vs-goose.md)
- [Click vs Harness²](https://www.anchorterminal.com/compare/click-agents-vs-harness2.md)
- [Click vs HarnessRouter](https://www.anchorterminal.com/compare/click-agents-vs-harnessrouter.md)
- [Click vs Jules](https://www.anchorterminal.com/compare/click-agents-vs-jules.md)
- [Click vs Junie CLI](https://www.anchorterminal.com/compare/click-agents-vs-junie.md)
- [Click vs Kilo Code CLI](https://www.anchorterminal.com/compare/click-agents-vs-kilo-code-cli.md)
- [Click vs Kimi Code CLI](https://www.anchorterminal.com/compare/click-agents-vs-kimi-code-cli.md)
- [Click vs Kiro CLI](https://www.anchorterminal.com/compare/click-agents-vs-kiro-cli.md)
- [Click vs Letta](https://www.anchorterminal.com/compare/click-agents-vs-letta.md)
- [Click vs mini-swe-agent](https://www.anchorterminal.com/compare/click-agents-vs-mini-swe-agent.md)
- [Click vs MiniMax Code](https://www.anchorterminal.com/compare/click-agents-vs-minimax-code.md)
- [Click vs Mistral Vibe CLI](https://www.anchorterminal.com/compare/click-agents-vs-mistral-vibe-cli.md)
- [Click vs Muse Code](https://www.anchorterminal.com/compare/click-agents-vs-muse-code.md)
- [Click vs OpenAI Agents API](https://www.anchorterminal.com/compare/click-agents-vs-openai-agents-api.md)
- [Click vs OpenAI Codex](https://www.anchorterminal.com/compare/click-agents-vs-openai-codex.md)
- [Click vs OpenHands](https://www.anchorterminal.com/compare/click-agents-vs-openhands.md)
- [Click vs OpenMausBot](https://www.anchorterminal.com/compare/click-agents-vs-openmausbot.md)
- [Click vs Orca](https://www.anchorterminal.com/compare/click-agents-vs-orca.md)
- [Click vs Paseo](https://www.anchorterminal.com/compare/click-agents-vs-paseo.md)
- [Click vs Prime Agent](https://www.anchorterminal.com/compare/click-agents-vs-prime-agent.md)
- [Click vs Qoder CLI](https://www.anchorterminal.com/compare/click-agents-vs-qoder-cli.md)
- [Click vs Qwen Code](https://www.anchorterminal.com/compare/click-agents-vs-qwen-code.md)
- [Click vs Mirror CLI](https://www.anchorterminal.com/compare/click-agents-vs-reflection-mirror.md)
- [Click vs Rovo Dev CLI](https://www.anchorterminal.com/compare/click-agents-vs-rovo-dev-cli.md)
- [Click vs Sculptor](https://www.anchorterminal.com/compare/click-agents-vs-sculptor.md)
- [Click vs T3 Code](https://www.anchorterminal.com/compare/click-agents-vs-t3-code.md)
- [Click vs Traycer](https://www.anchorterminal.com/compare/click-agents-vs-traycer.md)
- [Click vs Unstoppable](https://www.anchorterminal.com/compare/click-agents-vs-unstoppable.md)
- [Click vs Verdent](https://www.anchorterminal.com/compare/click-agents-vs-verdent.md)
- [Click vs Vibe-Trading](https://www.anchorterminal.com/compare/click-agents-vs-vibe-trading.md)
- [Click vs Warp (Warp Agent CLI and the Oz Agent API)](https://www.anchorterminal.com/compare/click-agents-vs-warp.md)
- [Cline vs OpenCode](https://www.anchorterminal.com/compare/cline-vs-opencode.md)
- [Conductor vs OpenCode](https://www.anchorterminal.com/compare/conductor-vs-opencode.md)
- [Crush vs OpenCode](https://www.anchorterminal.com/compare/crush-vs-opencode.md)
- [Cursor CLI vs OpenCode](https://www.anchorterminal.com/compare/cursor-cli-vs-opencode.md)
- [DeepSeek Harness (dsh) vs OpenCode](https://www.anchorterminal.com/compare/deepseek-harness-vs-opencode.md)
- [dsh-superagent (DeepSeek) vs OpenCode](https://www.anchorterminal.com/compare/deepseek-superagent-vs-opencode.md)
- [Devin vs OpenCode](https://www.anchorterminal.com/compare/devin-vs-opencode.md)
- [Droid CLI vs OpenCode](https://www.anchorterminal.com/compare/droid-cli-vs-opencode.md)
- [Pi vs OpenCode](https://www.anchorterminal.com/compare/earendil-pi-vs-opencode.md)
- [Emdash vs OpenCode](https://www.anchorterminal.com/compare/emdash-vs-opencode.md)
- [Gemini CLI vs OpenCode](https://www.anchorterminal.com/compare/gemini-cli-vs-opencode.md)
- [GitHub Copilot CLI vs OpenCode](https://www.anchorterminal.com/compare/github-copilot-cli-vs-opencode.md)
- [goose vs OpenCode](https://www.anchorterminal.com/compare/goose-vs-opencode.md)
- [Harness² vs OpenCode](https://www.anchorterminal.com/compare/harness2-vs-opencode.md)
- [HarnessRouter vs OpenCode](https://www.anchorterminal.com/compare/harnessrouter-vs-opencode.md)
- [Jules vs OpenCode](https://www.anchorterminal.com/compare/jules-vs-opencode.md)
- [Junie CLI vs OpenCode](https://www.anchorterminal.com/compare/junie-vs-opencode.md)
- [Kilo Code CLI vs OpenCode](https://www.anchorterminal.com/compare/kilo-code-cli-vs-opencode.md)
- [Kimi Code CLI vs OpenCode](https://www.anchorterminal.com/compare/kimi-code-cli-vs-opencode.md)
- [Kiro CLI vs OpenCode](https://www.anchorterminal.com/compare/kiro-cli-vs-opencode.md)
- [Letta vs OpenCode](https://www.anchorterminal.com/compare/letta-vs-opencode.md)
- [mini-swe-agent vs OpenCode](https://www.anchorterminal.com/compare/mini-swe-agent-vs-opencode.md)
- [MiniMax Code vs OpenCode](https://www.anchorterminal.com/compare/minimax-code-vs-opencode.md)
- [Mistral Vibe CLI vs OpenCode](https://www.anchorterminal.com/compare/mistral-vibe-cli-vs-opencode.md)
- [Muse Code vs OpenCode](https://www.anchorterminal.com/compare/muse-code-vs-opencode.md)
- [OpenAI Agents API vs OpenCode](https://www.anchorterminal.com/compare/openai-agents-api-vs-opencode.md)
- [OpenAI Codex vs OpenCode](https://www.anchorterminal.com/compare/openai-codex-vs-opencode.md)
- [OpenCode vs OpenHands](https://www.anchorterminal.com/compare/opencode-vs-openhands.md)
- [OpenCode vs OpenMausBot](https://www.anchorterminal.com/compare/opencode-vs-openmausbot.md)
- [OpenCode vs Orca](https://www.anchorterminal.com/compare/opencode-vs-orca.md)
- [OpenCode vs Paseo](https://www.anchorterminal.com/compare/opencode-vs-paseo.md)
- [OpenCode vs Prime Agent](https://www.anchorterminal.com/compare/opencode-vs-prime-agent.md)
- [OpenCode vs Qoder CLI](https://www.anchorterminal.com/compare/opencode-vs-qoder-cli.md)
- [OpenCode vs Qwen Code](https://www.anchorterminal.com/compare/opencode-vs-qwen-code.md)
- [OpenCode vs Mirror CLI](https://www.anchorterminal.com/compare/opencode-vs-reflection-mirror.md)
- [OpenCode vs Rovo Dev CLI](https://www.anchorterminal.com/compare/opencode-vs-rovo-dev-cli.md)
- [OpenCode vs Sculptor](https://www.anchorterminal.com/compare/opencode-vs-sculptor.md)
- [OpenCode vs T3 Code](https://www.anchorterminal.com/compare/opencode-vs-t3-code.md)
- [OpenCode vs Traycer](https://www.anchorterminal.com/compare/opencode-vs-traycer.md)
- [OpenCode vs Unstoppable](https://www.anchorterminal.com/compare/opencode-vs-unstoppable.md)
- [OpenCode vs Verdent](https://www.anchorterminal.com/compare/opencode-vs-verdent.md)
- [OpenCode vs Vibe-Trading](https://www.anchorterminal.com/compare/opencode-vs-vibe-trading.md)
- [OpenCode vs Warp (Warp Agent CLI and the Oz Agent API)](https://www.anchorterminal.com/compare/opencode-vs-warp.md)
- [Agent Relay vs OpenCode](https://www.anchorterminal.com/compare/agent-relay-vs-opencode.md)
- [Clawboo vs OpenCode](https://www.anchorterminal.com/compare/clawboo-vs-opencode.md)
- [CLI Manager vs OpenCode](https://www.anchorterminal.com/compare/cli-manager-vs-opencode.md)
- [Friday vs OpenCode](https://www.anchorterminal.com/compare/friday-work-vs-opencode.md)
- [Harness vs OpenCode](https://www.anchorterminal.com/compare/harness-autonomous-vs-opencode.md)
- [herdr vs OpenCode](https://www.anchorterminal.com/compare/herdr-vs-opencode.md)
- [OpenCode vs Paperclip](https://www.anchorterminal.com/compare/opencode-vs-paperclip.md)
- [OpenCode vs Parallax](https://www.anchorterminal.com/compare/opencode-vs-parallax-agents.md)

---

Query this catalogue directly over MCP: https://www.anchorterminal.com/mcp (Streamable HTTP, no key). How: https://www.anchorterminal.com/agents/#mcp
